Deutsche Telekom Tiptel 274 1082688 Manuel D’Utilisation
Codes de produits
1082688
Dialling with your PC
66
Dialling by using AT commands
In case you wish to write your own PC application please note the following:
Transfer parameters: 230400 Baud, 8 Bit, no parity, 1 stop bit, no flow control.
Following commands are supported:
ATD Connect e.g. ATD12345 (Number 12345 is being dialled)
ATH Disconnect
ATA Take call
ATH Disconnect
ATA Take call
Commands that have been received correctly will by acknowledged by the
telephone with OK
AT-commands must be sent in capital letters and without spaces.
Following messages can be sent by the telephone:
RING Call
signalling
NMBR = 12345 Caller's number
NAME = Test
NAME = Test
Caller's name (if known)
VCON
Will be sent at the end of dialling
<DLE>b Line
busy
All messages except "line busy" have the following format:
<CR><LF><Message><CR><LF>
Please note that the strings <DLE
>
(Ctrl P), <CR> (Ctrl M) and <LF
>
(Ctrl J)
are control digits.