Hunter Sea Air 23568 Manuel D’Utilisation

Hunter Fan Company 

42701-01 • 01/25/06 

42701-01 • 01/25/06 

Hunter Fan Company

 

All wiring must be in accordance with national and local electrical 
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a 
qualified electrician.
Wall switches are not included. Select an acceptable general-use switch in 
accordance with national and local electrical codes.
4-1.  Make sure the power to the outlet box and associated wall switch 

location is still OFF.

    To connect the wires, hold the bare metal leads together and place a 

wire nut over them, then twist the wire nut clockwise until tight.

     

 CAUTION:  Be sure no bare wire or wire strands are visible after 

making connections.

    Connect the wires as follows:

• e bare or green ground wire from the ceiling to the green 

ground wire from the ceiling plate and the green ground wire 
from the fan

• e white wire from the ceiling to the white wire from the fan
• e black wire from the ceiling to the black and the black/white 

wire from the fan 

4-2.  Push all wires and wire nuts into the outlet box.

Wire Nut