Cisco Factory 8MB to 12MB upgrade 800Series (B) MEM800-8U12F Manuel D’Utilisation

78-10446-01

Enter the global configuration mode before configuring the RCAPI port number:

router(config)# rcapi server port

Use the show rcapi command to display:

Whether RCAPI is turned on or off.

If RCAPI is running, details about the list of CAPI clients currently registered, the type of
application that each client is running, and the status of each CAPI call at the time of the display.

This command contains no arguments or keywords.

Privileged EXEC.

This command works only with the Net3 switch type.

Sets the directory number and the subaddress of the router.

Displays the status of RCAPI and, if enabled, the details of the application.

Displays diagnostic DCP and driver messages.

Cisco IOS Release
12.0(7)XV

The command show rcapi status was introduced on the Cisco 800
series router.