Philips AJH510 AJH510/37 Manuel D’Utilisation

8

EN

4  Get started

Always follow the instructions in this chapter in 

sequence.

Connect power

Caution

 

•

Risk of product damage! Make sure that the power 

voltage corresponds to the voltage printed on the back 

or underside of the alarm clock.

 

•

Risk of electric shock! When you unplug the AC 

adapter, always pull the plug from the socket. Never 

pull the cord.

Note

 

•

The type plate is located on the bottom of the alarm 

clock.

Connect the AC adapter to the wall outlet.

  

Replace battery

Note

 

•

You can only use AC power as power supply. The pre-

installed lithium CR2032 battery can only back up clock 

and alarm settings.

 

•

When power is disconnected, the display backlight is off.

When the low battery indicator   is displayed, 

replace the battery as illustrated. 

  

Tip

 

•

Remove the battery if the alarm clock will not be in use 

for a long period of time.

Plug and set

Time has been preset at the factory. When 

power is connected, the set time is displayed 

automatically. 

The built-in lithium battery can maintain clock 

setting despite power interruption. 

Select time zone

If the hour digits of the preset time do not 

match your local time, you need adjust the time 

zone settings.

1 

In standby mode, press TIME ZONE.

 

»

The current time zone number blinks 

on the display panel.

2 

Rotate VOLUME +/- to select time zone 

(-10 to -4 adjustable).

3 

Press TIME ZONE to confirm the setting.