BlueWalker 10120174 Manuel D’Utilisation
2
EN
1.3 CE marking
The product has the CE marking in compliance with the following European directives:
LVD Directive (Safety) 2006/95/EEC
EMC Directive 2004/108/EEC
LVD Directive (Safety) 2006/95/EEC
EMC Directive 2004/108/EEC
The only user operations permitted are:
Start up and shut down the UPS, excluding the commissioning start-up.Use of the LCD con-
trol panel and Emergency Power Off (EPO) switch.Use of optional connectivity modules and
their software.The user must follow the precautions and only perform the described opera-
tions.Any deviations from the instructions could be dangerous to the user or cause acciden-
tal load loss.
Start up and shut down the UPS, excluding the commissioning start-up.Use of the LCD con-
trol panel and Emergency Power Off (EPO) switch.Use of optional connectivity modules and
their software.The user must follow the precautions and only perform the described opera-
tions.Any deviations from the instructions could be dangerous to the user or cause acciden-
tal load loss.
Warning!
The user is not permitted to open any screws excluding connectivity plates and the
Emergency Power Off (EPO) switch. Failure to recognise the electrical hazards could
prove fatal.
Emergency Power Off (EPO) switch. Failure to recognise the electrical hazards could
prove fatal.
Note!
This product for commercial and industrial application in the second environment Instal-
lation restrictions or additional Measures may be needed to prevent disturbances.
lation restrictions or additional Measures may be needed to prevent disturbances.
1.4 User precaution
Caution!
Read the manual before operating or working on the UPS.