MuxLab 500130 Fascicule

VideoEase Passive CCTV Hub

500130, 500131

_____________________________________________________________________________________

Overview
The Passive CCTV Hub allows video, remote power
and PTZ control to be transmitted via one Cat5
cable, thus eliminating the need to install multiple
cables for more efficient cabling in the security
video environment. There are two 16-port models:
500130; with coax video output and 500131; with
twisted pair video output. The Passive CCTV Hub
works in conjunction with the 500000, 500009,
500015, 500022, 500023, 500024, 500029 and
500120.

Features/Benefits
Port switch to set Power-Thru or Pass-Thru mode
Pin configuration table on unit
Space efficient, rackmountable

Specifications

Environment

Composite video; NTSC, PAL, SECAM

Devices

CCTV cameras, DVRs, monitors, switchers, multiplexers and other CCTV equipt.

Transmission

Transparent to the user.

Video

Bandwidth

DC to 8 MHz.

Maximum Input

1.1Vp-p

Insertion Loss

Less than 2 dB per pair over the frequency range from DC to 8 MHz

Return Loss

Greater than 15 dB over the frequency range from DC to 8 MHz

Common Mode Rejection

Greater than 40 dB @ 8 MHz

Max. Distance - Colour

Cat 3 –1,200 ft (365m); Cat 5 – 2,200 ft. (670m)*

*Shorter distances will result with DVR equipment. Typically 1,000 to 1,500 ft

Max. Distance - B&W

Cat 3 –1,500 ft (457m); Cat 5 – 2,500 ft (762m)

Remote Power

Switch Mode

Pass-Thru Mode (500022)

Power-Thru Mode (500024/500029)

Number of twisted pairs

Two (2)

Three (3)

Max. Distance @ 24VAC*

*Based on 10% voltage drop at
camera. Longer distances may be
achieved @ 28 VAC.

5 VA: 350 ft (107m) 10 vA: 175 ft (53m)
20 VA: 90 ft (30m) 30 vA: 60 ft (20m)

5 VA: 518 ft (170m) 10 VA: 259 ft (85 m)
20 VA: 130 ft (43 m) 30 VA: 86 ft (28 m)

Maximum Input Voltage

50 Volts (AC RMS/DC). Recommended Class II PSU with fuse protection per port

Maximum Current Rating

4.5A (AC RMS/DC)

2-Wire PTZ Control (i.e. RS-422, Manchester/Bi-Phase, half duplex RS485) – Pass-Thru Mode (500022)

Wiring

Remote 2-wire PTZ control supported via one (1) twisted pair.

Maximum Distance

Up to 4,000 ft (1.2 km) depending on the PTZ camera vendor**

**Please consult your CCTV equipment vendor for more detailed performance specifications.

Maximum Power Rating

50 Volts (AC RMS/DC); 3A (AC RMS/DC)

Mechanical & Environmental

Cable – UTP

24 AWG or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz
Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz

Cable – Coax

Impedance: 75 Ω at 1 MHz. (RG59/U). Max. 25 ft. of coax allowed end to end.

Connectors

Video: Sixteen (16) BNC-F (500130), Sixteen (16) 2-pole screw terminals (500131)
Power: Sixteen (16) 2-pole screw terminals Control: Sixteen (16) 2-pole screw
terminals. Combined signals: Sixteen (16) RJ45 jacks

Port Configuration Switch

Sets each port as Pass-Thru (500022) or as Power-Thru (500024/500029)

RJ45 Pin Configuration*

Signal

500022 Mode

500024/500029 Mode

*Reverse polarity sensitive

Power A (+)

1, 3

1, 3, 5

Power B (-)

2, 6

2, 4, 6

Control (+)

Not used

Control (-)

Not used

Video BNC Center (Tip)

7 [T] opposite to 500000

Video BNC Ground (Ring)

8 [R] opposite to 500000

Temperature

Operating: 0° to 55°C. Storage:-20° to 85°C. Humidity: up to 95%

Enclosure

Black, anodized aluminum

Dimensions

19” (48.26 cm) W x 1.75” (4.4 cm) H x 1.5” ( 5.1 cm) D

Weight

2.3 lbs. (1.1kgs)

Warranty

Lifetime

Order Information

500130 Passive CCTV Hub, UTP/Coax ; 500131 Passive CCTV Hub, UTP/UTP