3com 3C16410 SuperStack 3 Baseline 3C16410 Manuel D’Utilisation

The SuperStack

®

 3 Baseline Dual Speed Hub is an easy-to-use, 10/100 

autosensing Class II hub (repeater). It is ideal for users who want to 
connect both Ethernet and Fast Ethernet devices (workstations and other 
equipment) to the same hub.

All ports on the Baseline Dual Speed Hub are half duplex, autosensing 
10 Mbps and 100 Mbps. Each port senses the speed of the connected 
equipment and operates at the appropriate speed.

The Baseline Dual Speed Hub comes with:

„

One power cord for use with the Baseline Dual Speed Hub

„

Four standard height, self-adhesive rubber pads

„

One rack mounting kit

„

A warranty information sheet with details of online registration

The Baseline Dual Speed Hub is suitable for office use where it can be free 
standing or rack-mounted (in a wiring closet or equipment room). The 
hub is powered from the AC mains supply

The Baseline Dual Speed Hub has 16 or 24 shielded RJ-45, 10/100 
autosensing ports on the front panel. Each port can be connected to 
either a 10BASE-T (Ethernet) or a 100BASE-TX (Fast Ethernet) device. 

Internally, the hub has two repeater segments (10 Mbps and 100 Mbps) 
which are linked by a switch, allowing connected 10 Mbps and 100 Mbps 
devices to communicate.

You can connect a 10BASE-T or 100BASE-TX hub or switch to the 
Baseline Dual Speed Hub.