REPOTEC RP-1703 Fascicule

》RP-1703

The LAN Cable Testers are intelligent continuity testers for LAN cables which save time on the job. Their intuitive operation 
keep you from wasting time working through complex menus.

◎  Hand-held and easy to operate.
◎  Easy to read LCD display, with back light.
◎  Easy to read cable status and verify cable continuity; open, short, and mismatches.
◎  Auto scan pin assignment. 
◎  Suggestion mode for intelligent cable identification. (Cable type earch)
◎  Standard pin configurations and (4) user defined cable modes memorized in CPU.
◎

Tests for shielded and non-shielded cable types.

◎

Can review the captured pin assignment and failure status.

◎

Automatic power shut down feature for extended battery life.

◎

Maximum testing length is up to 1030 meters.

◎

Identify and trace the other end ID. ( using supplied terminator )

◎

Battery low indicator :
Easy to identify RJ-45 and BNC cable types against preset wiring schemes. 

Tests for shielded and non-shielded cable types.
◎  Unshielded Twisted Pair ( UTP 100ohm category 3, 4 & 5)
◎  Foil shielded Twisted Pair ( FTP 100ohm and 120ohm Category 3)
◎  Shielded Twisted Pair (STP 150ohm type 1 & 6)
◎  10Base-T, 100Base-TX and 100Base -T4
◎  TP-PMDEIA/ TIA-568A/ B
◎

Token Ring

◎

USOC

◎

10Base/HUB (AT&T 258A) ,10Base-2

◎  LCD Display: 2 line by 12 characters with LCD back light
◎  Connectors: (2) RJ-45 (8P8C) jacks.
◎  Control keys: (ENTER) (MODE) (ESC)
◎  Temperature: 5 - 45°c
◎  Power: (1) 9V dry cell battery.
◎  Size: 15.4 * 6.5 * 3.5 cm
◎

Weight: 300g net