Samsung 17" LCD MONITOR LS17HABTS7 Manuel D’Utilisation

How can I change the 
frequency?

The frequency can be changed by reconfiguring the video card.  

Note that video card support can vary, depending on the version 
of the driver used. (Refer to the computer or the video card 
manual for details.) 

How can I adjust the resolution?

Windows ME/XP/2000 : Set the resolution at the Control 
Panel

¡

Display

¡

Settings.

* Contact the video card manufacturer for details.

How can I set the Power Saving 
function?

Windows ME/XP/2000 : Set the function at BIOS-SETUP of the 
computer or the screen saver. (Refer to Windows/Computer 
Manual).  

How can I clean the outer 
case/LCD Panel?

Disconnect the power cord and then clean the monitor with a soft 
cloth, using either a cleaning solution or plain water.  

Do not leave any detergent or scratches on the case. Do not let 
any water enter the monitor. 

Self-Test Feature Check 

 |  

Warning Messages 

|

Environment

 |

Useful Tips

1. Turn off both your computer and the monitor.  
2. Unplug the video cable from the back of the computer.  
3. Turn on the monitor.  

If the monitor is functioning properly, you will see a box in the illustration below.  

This box appears during normal operation if the video cable becomes disconnected or 
damaged. 

4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the 

monitor.  
If your monitor screen remains blank after using the previous procedure, check your video 
controller and computer system; your monitor is functioning properly. 

If there is something wrong with the input signal, a message appears on the screen or the 
screen goes blank although the power indicator LED is still on. The message may indicate 
that the monitor is out of scan range or that you need to check the signal cable.