Aruba RAP-109-US Fiche De Données

Aruba RAP-100 Series Remote Access Points

Aruba Data Sheet

•

AP type: Dual-radio, dual-band 802.11n indoor

•

Software-configurable dual radio supports 2.4 GHz and 5 GHz

•

2x2 MIMO with two spatial streams and up to 300 Mbps 
wireless data rate per radio

•

Supported frequency band (country-specific restrictions apply):

 

-

2.4000 GHz to 2.4835 GHz

 

-

5.150 to 5.250 GHz

 

-

5.250 to 5.350 GHz

 

-

5.470 to 5.725 GHz

 

-

5.725 to 5.875 GHz

•

Available channels: Managed by Aruba Instant or Mobility 
Controller, depending upon the configured regulatory domain

•

Supported radio technologies:

 

-

802.11b: Direct-sequence spread-spectrum (DSSS)

 

-

802.11a/g/n: Orthogonal frequency-division multiplexing 

(OFDM)

 

-

802.11n: 2x2 MIMO with two spatial streams

•

Supported modulation types:

 

-

802.11b: BPSK, QPSK, CCK

 

-

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

•

Transmit power: Configurable in increments of 0.5 dBm

•

Maximum (aggregate) transmit power (limited by local  
regulatory requirements):

 

-

2.4-GHz band: +21 dBm

 

-

5-GHz bands: +21 dBm

•

Advanced Cellular Coexistence (ACC) feature to effectively deal 
with interference from cellular systems

•

Maximum ratio combining (MRC) for improved receiver 
performance

•

Cyclic delay diversity (CDD) for improved downlink  
RF performance

•

Short guard interval for 20-MHz and 40-MHz channels

•

Space-Time Block Coding (STBC) for increased range and 
improved reception

•

Supported data rates (Mbps):

 

-

802.11b: 1, 2, 5.5, 11

 

-

802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

 

-

802.11n: MCS0 to MCS15 (6.5 Mbps to 300 Mbps)

•

802.11n high-throughput (HT) support: HT 20/40

•

802.11n packet aggregation: A-MPDU, A-MSDU

•

Up to 20 Mbps

•

Supported power sources:

 

-

802.3af (PoE) or 802.3at (PoE+) on uplink Ethernet port 

Note: When using PoE, the USB port will be enabled only 

when an 802.3at-compliant source is used

 

-

12 volts from external power adapter (sold separately)

•

Maximum power consumption: 

 

-

Without USB device connected: 12.5 watts

 

-

With USB device: 15 watts

•

RAP-108: Two RP-SMA connectors for external dual-band 
antennas

•

RAP-109: Four integrated omni-directional antennas for  
2x2 MIMO with maximum antenna gain of 5.0 dBi in both  
2.4 GHz and 5 GHz. Built-in antennas are optimized for  
vertical orientation

•

Network:

 

-

ENET0 (uplink): One 10/100/1000BASE-T Ethernet (RJ-45), 

auto-sensing link speed and MDI/MDX

 

-

ENET1 (local): One 10/100BASE-T Ethernet (RJ-45), auto-

sensing link speed and MDI/MDX

•

One port for DC power connector

•

One USB 2.0 port (Type A connector)

•

One serial console interface (RJ-45)

•

Visual indicators (LEDs):

 

-

Power/system status

 

-

Ethernet link status (2x)

 

-

Radio status (2x)

•

Kensington security slot

•

Reset button

•

Desktop (vertical): Using stand supplied with product

•

Wall (vertical): Using optional wall mount accessory

•

Ceiling (horizontal, not recommended for RAP-109): Using 
optional ceiling mount accessories

•

Dimensions (unit):

 

- Excluding desk mount:

•  160 mm (W) x 43 mm (D) x 160 mm (H)
•  6.30” (W) x 1.69” (D) x 6.30” (H)

 

- With desk mount:

•  181 mm (W) x 72 mm (D) x 160 mm (H)
•  7.13” (W) x 2.83” (D) x 6.30” (H)

•

Weight (unit): 

 

- Excluding desk mount: 385 g (13.6 oz)

 

- With desk mount: 460 g (16.2 oz)

•

Dimensions (shipping)

 

- 230 mm (W) x 220 mm (D) x 90 mm (H)

 

- 9.06” (W) x 8.66” (D) x 3.5” (H)

•

Weight (shipping): 750 g (1.65 lbs)

•

Operating:

 

-

Temperature: 0° C to +40° C (+32° F to +104° F)

 

-

Humidity: 5% to 95% non-condensing

•

Storage and transportation:

 

-

Temperature: -40° C to +70° C (-40° F to +158° F)