Philips HDP1550 HDP1550/F7 Manuel D’Utilisation
Codes de produits
HDP1550/F7
12
Philips · HDP15x0
Initial Installation
1 Push the POWER B button for 5 seconds till the
power indicator turns to red to turn the device on.
2 Turn the device towards a suitable projection sur-
face or wall. Note that the distance to the projection
surface must be a minimum of 0.1 meter (0.33 feet)
and a maximum of 0.5 meter (1.64 feet) (see Setting
up the Device, page 4). Make sure the projector is in
a secure position.
surface must be a minimum of 0.1 meter (0.33 feet)
and a maximum of 0.5 meter (1.64 feet) (see Setting
up the Device, page 4). Make sure the projector is in
a secure position.
3 Use the focus wheel on the font of the device to
adjust the image sharpness.
4 The first time you turn on the device, you should set
the following settings.
5 Use the keys ¡/¢ to select the language and con-
firm with OK.
6 Use the keys ¡/¢/À/Á to select the symbol +
or - to set the date (day, month and year) and con-
firm with OK.
firm with OK.
7 Use the keys ¡/¢ to select the date format and
confirm with OK.
8 Use the keys ¡/¢ to select the time zone and
confirm with OK.
9 Use the keys ¡/¢/À/Á to select the symbol +
or - to set the date (hour and minute) and confirm
with OK.
with OK.
10 Use the keys ¡/¢ to select the time format (12h
or 24h) and confirm with OK.
11 Use the keys ¡/¢ to select the location (Home
or Shop) and confirm with OK.
Home: for normal use.
Shop: when you choose this option, the projector
starts in demonstration mode. In this mode, the pro-
jector automatically displays the pictures or videos
stored in the internal memory in loop.
Home: for normal use.
Shop: when you choose this option, the projector
starts in demonstration mode. In this mode, the pro-
jector automatically displays the pictures or videos
stored in the internal memory in loop.
12 A message is displayed to give the address web site
where the user manual can be downloaded. Press
OK to continue.
OK to continue.
Turning off the projector
Press the B button on the panel control of the device
or on the remote control more than 5 seconds.
or on the remote control more than 5 seconds.
ECO mode
Press shortly the B button on the panel control or on
the remote control to put the device in ECO mode.
the remote control to put the device in ECO mode.
To wake up the device, press shortly again on the
B button.
B button.
Setting up the Language
The device has already been installed. In order to
change the menu language, proceed as follows:
change the menu language, proceed as follows:
1 Use the navigation keys to select Settings.
2 Confirm with OK.
3 Select Language/ Language with ¡/¢.
4 Confirm with OK.
5 Select Menu Language with ¡/¢.
6 Confirm with OK.
7 Select you desired language with ¡/¢.
8 Confirm with OK.
9 Exit with u.
Notice
During the first installation, use OK key to
validate your choice and continue to the next
step, and the ¿ key to return on the previ-
ous step.
validate your choice and continue to the next
step, and the ¿ key to return on the previ-
ous step.
Notice
The demonstration mode can be activated or
deactivated on the menu Setting/Mainte-
nance/Demo mode.
deactivated on the menu Setting/Mainte-
nance/Demo mode.
Notice
If you press the power B button on the con-
trol panel for 5 seconds the unit is turned off,
you must hold the power B button down
again for 5 seconds to turn it back on.
trol panel for 5 seconds the unit is turned off,
you must hold the power B button down
again for 5 seconds to turn it back on.
LU UST_EN_US.book Page 12 Mercredi, 30. juillet 2014 9:22 09