Cisco 7921G Power Supply for United Kingdom CP-PWR-7921G-UK= Manuel D’Utilisation
Codes de produits
CP-PWR-7921G-UK=
62
OL-15163-01
Obtaining a Headset
Your phone supports headset jack types with a 2.5 mm, 3-band/ 4 connector. For information about
purchasing headsets, see
purchasing headsets, see
.
Switch to the desktop charger
speakerphone
speakerphone
1.
Place the wireless IP phone in the desktop charger cradle.
“AC connected!” displays on the screen.
2.
Press down on the top of the phone.
“Docking connected!” displays on the screen and the
icon
displays on the phone status line.
The desktop charger speaker and microphone are connected.
3.
Place and receive calls.
Use all the buttons on your phone, including
and
.
You can use the headset to answer calls when the phone is in the
desktop charger.
desktop charger.
Note
The internal, single-direction microphone is located on the lower
left side of the phone (two small holes). For best results, place
the desktop charger in front of you when using the
speakerphone.
left side of the phone (two small holes). For best results, place
the desktop charger in front of you when using the
speakerphone.
Switch to the handset from
the desktop charger
speakerphone
the desktop charger
speakerphone
1.
Hold the top of the phone and move it forward before lifting it
off the desktop charger.
off the desktop charger.
2.
Use the handset to continue with the call. The desktop charger
speaker and microphone disconnect.
speaker and microphone disconnect.
Note
You cannot turn off the desktop speaker by using the
button.
Adjust the volume level for a
call
call
During a call, press
to adjust the volume for the handset, speaker,
headset or
desktop charger.
Note
The new volume level is preserved for future calls after the
phone is powered off.
phone is powered off.
If you want to...
Then...