HP 767470-A41 Manuel D’Utilisation

On the front of the top cover, pull the cable to disengage it from the adhesive that secures it, and then

pull the cable through the hole in the top cover (4).

Remove the function board from the top cover.

Reverse this procedure to install the function board.

Card reader board for use in HP 440 models

768052-001

Card reader board for use in HP 440 models

767445-001

Before removing the card reader board, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and

then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the following components:

68

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts