Fujitsu Intel Xeon E5-2630 v3 S26361-F3849-L430 Manuel D’Utilisation

Codes de produits

S26361-F3849-L430

System configurator and order-information guide

Start PRIMERGY RX2540 M1

PRIMERGY RX2540 M1 Status 2014-09-30

Section

Basic unit

System unit consisting of:

* 2U Housing without power supply modules

* Basic units with:
- 2 Hot-Plug Power Supply Bays

- 5 Fans (full redundancy)

- 12 memory DIMMs per CPU ( max 768GB ) => Total 24 DIMMs ( max 1536GB ) for two CPU`s

as soon as available: max 3072GB per system with two CPU`s

* SAS Backplanes for 4x, 8x or 12x 3.5" HD LFF

or for 8, 16 or 24x 2.5" HD SFF or PCIe SFF backplanes (Feb. 2015)

with cable connection to on-board, modular RAID Controller or PCIe Switch

* Drives/Bays

- 4, 8 or 12 bays 1" for hot plug 3.5" HD (1" high)

or 8, 16 or 24 bays for hot plug 2.5" HD (Feb. 2015)

- 1 bay SATA-DVD-RW 0,4" height (option, not for basic unit with 12x 3.5" HD

and with 24 x 2,5" HD

)

- 1 bay for 5.25" and 1.6" high Backup device, not possible for basic units with 3.5" HD

and for basic unit with 24 x 2,5" HD

* Integrated ServerView Diagnostics Technology ( Diagnosis LED`s ) for indication of internal

failed components

Systemboard D3289 with:

* Up to two Xeon DP CPU`s (Socket-R3)

with 2 serial QPI links ( Quick Path Interconnect ) and four memory channels per CPU

First CPU has to be selected for an orderable basic unit,

* Chipset Intel® C610 Series (codenamed Wellsburg)

* 6 PCI slots low profile:

- 3x PCIe-3 x16 (2 slots are connected to CPU 2 and are useable with configured 2nd CPU only!)

- 2x PCIe-3 x8 (notched to install x16 cards, 1 slot is connected to CPU 2)

- 1x PCIe-3 x8 (may be used for modular RAID controller)

8 PCI slots are possible with PCIe riser card options (4x full height, please see Section VII, Nov. 2014)

* 24 memory slots (each CPU 12 slots) DDR4 are available

- Memory is divided into 12 DIMMs per CPU ( 4 channels with 3 slots per channel )

First Memory ( one module ) has to be selected for an orderable basic unit per CPU

* Dynamic LOM

Quad Port 1Gb/10Gb Emulex Controller XE104 (Skyhawk) on motherboard

up to Quad Port 1Gb or

Dual Port 10Gb NIC plus full CNA functionality with iSCSI-, FCoE- RDMA and UMC support

connectors (external interfaces) are added by different variants of DynamicLoM interface modules

The Service LAN-port can be switched alternatively

to a standard LAN (port 1)

* iRMC S4 (integrated Remote Management Controller) on-board server management controller with

dedicated 10/100/1000 Service LAN-port and integrated graphics controller.

* Graphics Controller integrated in iRMC S4 (integrated Remote Management Controller):

1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz,

640x480x32bpp 85Hz

(1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)

Interfaces at the rear:

* 1x RS-232-C (serial, 9 pins) (usable for BMC or OS or shared)

* 1x VGA (15 pins)

* 2x USB 3.0 ( UHCI ) with 5 GBit/s, no USB wakeup

* 2x USB 2.0 ( UHCI ) with 480MBit/s, no USB wakeup

* 2x or 4x LAN 1Gb RJ45 or 2x LAN 10 Gb SFP+ or RJ45, 1x Service-LAN RJ45

Interfaces on the front:

* 2x USB 3.0 ( UHCI ) with 5 GBit/s, no USB wakeup

(only 1x USB 2.0 for basic unit with 12x 3.5" HD and with 24 x 2,5" HD)

* 1x VGA (15 pins) as an option

(not for basic unit with 12x 3.5" HD and with 24 x 2,5" HD)

Interfaces internal:

* 1 port for UFM Module

* 1 port for backup device USB3.0 (USB 3.0 Type A Connector)

* 1x SATA 3Gbit interface for ODD

* 1x SATA 3GBit for DOM

* 8x SATA 3Gbit interface for 8 SATA HD

(first release for 4 SATA HD only!)

Software:

* ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates

* Documentation engl. (multilingual on CD)

Fujitsu Technology Solutions x86 PRIMERGY Serve

4 of 30