Metra AX-ADXSVI-GM2 Fascicule
METRA. The World’s best kits.™
metraonline.com
1-800-221-0932
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
Installation Instructions for AX-ADXSVI-GM2
REV
. 1/16/2014 INST
AX-ADXSVI-GM2
(continued on next page)
AX-ADXSVI-GM2
WIRING THE AX-ADXSVI-GM2
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
Red wire to the ignition wire of the aftermarket radio.
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• The
Orange/White wire will not be used in this application. Tape up or cap off this
wire and disregard it.
• Connect the
Blue wire to the antenna turn on wire of the aftermarket radio.
• Connect the
White wire to the left front positive speaker output of the aftermarket radio.
• Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.
• Connect the
Gray wire to the right front positive speaker output of the
aftermarket radio.
• Connect the
Gray/Black wire to the right front negative speaker output of the
aftermarket radio.
• Connect the
Green wire to the radio’s left rear positive speaker output.
• Connect the
Green/Black wire to the radio’s left rear negative speaker output.
• Connect the
Purple wire to the radio’s right rear positive speaker output.
• Connect the
Purple/Black wire to the radio’s right rear negative speaker output.
CHEVROLET
Cobalt
2007-2010
HHR
2006-2011
Malibu
2008-2012
PONTIAC
G5
2007-2008
G6
(5th digit of VIN must be a J, K, or L)
2009
G6
2010
Solstice
2006-2009
SATURN
Aura
2007-2009
Sky
2006-2009
APPLICATIONS
KIT FEATURES
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems or when replacing amplified system
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• USB updatable
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems or when replacing amplified system
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• USB updatable
Note:
1) This harness must be used in conjunction with the AX-ADXSVI
2) All chimes will be lost when using this harness
1) This harness must be used in conjunction with the AX-ADXSVI
2) All chimes will be lost when using this harness