Zebra P1002512 Manuel D’Utilisation
Rev. 1.04
- 20 -
EM 220
Mobile Printer Service Manual
2-11 Peripherals Connection
This product can communicate with other devices via Bluetooth communication and cable.
2-11-1 Bluetooth Connection
1) The printer can be connected to devices equipped
with Bluetooth communication capacity
(PDAs, PCs, etc.).
(PDAs, PCs, etc.).
2) Use the Bluetooth connection function supported
by the device to connect to the printer.
NOTE
Refer to the Bluetooth Manual for more details on
connection.
You can check authentication, Encryption mode as
well as connection mode of the Bluetooth from self
test page.
connection.
You can check authentication, Encryption mode as
well as connection mode of the Bluetooth from self
test page.
2-11-2 Interface Cable Connection
1) Open the Interface Cap ①.
2) Connect the interface cable (optional) ② to the
2) Connect the interface cable (optional) ② to the
cable connector of the printer.
NOTE
Use only cables (optional) provided by Zebra (USB,
Serial).
3) Connect the interface cable to the USB port of the
device (PDAs, PCs, etc.).
NOTE
The interface cable that can be connected with the
printer is available in both USB and Serial type.
Refer to the service manual for detailed interface
cable specifications.
printer is available in both USB and Serial type.
Refer to the service manual for detailed interface
cable specifications.
CAUTION
The Bluetooth connector located on the right side of the printer is for program downloading only.
This connector is for service providers only.
This connector is for service providers only.
①
②