PQI Air Pen 6W41-0000R2002 Manuel D’Utilisation
Codes de produits
6W41-0000R2002
EN-19
Air Pen User’s Manual
Air Pen Configuration
Configure the wireless AP settings here.
1. Go to Settings > Air Pen Configuration.
2. Specify the channel, SSID, WAN mode, and Wi-Fi password.
3. Tap Save to save the data.
4. A warning message appears. Tap OK to continue. The Wi-Fi connection is
automatically disconnected.
5. A message appears, prompting you to reconnect and restart the application. Tap
OK to continue, and the
PQI Air Pen+
application closes.
2
NOTES:
• If you are not sure which channel to choose, set the setting to Auto. The system will
automatically assign to an available channel to avoid conflicts with existing wireless
networks.
networks.
• To specify the IP address on the Air Pen, set the WAN mode setting to STATIC.
• The minimum password length is 8. However, you can set the password up to 63
• The minimum password length is 8. However, you can set the password up to 63
alphanumerical characters (case sensitive).
USING THE DEVICE AS WIRELESS AP
1. Connect one end of the network cable (Ethernet RJ-45) to the Ethernet port on the
device.
Network
2. Plug the other end of the network cable to an Ethernet port on a router or network
switch.
3. Connect your mobile device such as a smartphone, tablet or notebook to the Air
Pen. See “Connecting to the Air Pen via Wi-Fi” on page 10.