Lappkabel UNITRONIC® ETHERNET Data cable Blue 2170300 Fiche De Données
Codes de produits
2170300
U.I. Lapp
GmbH
DATA SHEET
ETHERLINE
®
P FLEX Cat. 5e 4x2x26/7 AWG
DB2170300
valid from: 13.02.2014
Originator: RAWE/PDC
approved: HAPF/PDC
approved: HAPF/PDC
Document:
DB2170300
page 1 of 2
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10DE
PD 0019/2.2_11.10DE
Application
ETHERLINE® P FLEX CAT.5e 4 x 2 x 26AWG is a halogen free, flexible CATEGORY 5e high speed data
transmission cable suitable for application in the industrial environments to connect the (FAST-) ETHERNET
network with the field bus level. This data cable meets the requirements of Standards EIA/TIA-568 TSB-36 and ISO/IEC
11801 „Generic Cabling for Customer Premises“ for CLASS D Links. The high quality double screening ensures a high secu-
rity during data transmission in areas with electromagnetic fields. The PUR outer sheath is resistant against mineral oils,
fats, against abrasion and against atmospheric UV radiation. The cable is designed for fixed installation and flexible applica-
tions without forced guidance and tensile stress.
Approvals: UL AWM styles 11117 and 21576 (1000 V, 80 °C), acc. to UL 758
transmission cable suitable for application in the industrial environments to connect the (FAST-) ETHERNET
network with the field bus level. This data cable meets the requirements of Standards EIA/TIA-568 TSB-36 and ISO/IEC
11801 „Generic Cabling for Customer Premises“ for CLASS D Links. The high quality double screening ensures a high secu-
rity during data transmission in areas with electromagnetic fields. The PUR outer sheath is resistant against mineral oils,
fats, against abrasion and against atmospheric UV radiation. The cable is designed for fixed installation and flexible applica-
tions without forced guidance and tensile stress.
Approvals: UL AWM styles 11117 and 21576 (1000 V, 80 °C), acc. to UL 758
cRU AWM I/II A/B (FT2) acc. to CSA C22.2 No. 210-05
Design
Conductor
bare copper, fine-wire stranded 26/7 AWG (7 x ca. 0.16 mm; 7 x 34 AWG),
ca. 0.14 mm
ca. 0.14 mm
2
Insulation
foam-skin polyethylene, core ∅ ca. 0.95 mm
Core identification code
acc. to IEC 708-1
pair 1: white(-orange)/orange; pair 2: white(-green)/green
pair 1: white(-orange)/orange; pair 2: white(-green)/green
Stranding
cores twisted to pairs, pairs stranded together
Wrapping
1 layer non-woven tape
Screening
plastic laminated aluminum foil
on top:
braid of tinned copper wire, coverage ca. 85 %
on top:
braid of tinned copper wire, coverage ca. 85 %
Outer sheath
PUR halogen free compound, blue (similar to RAL 5021), outer Ø: ca. 6.1 mm
Electrical properties at 20° C
Resistance (loop)
max. 284 Ω/km
Insulation resistance
min. 5 GΩxkm
Mutual capacitance
nom. 48 nF/km
(at 800 Hz)
(at 800 Hz)
Characteristic impedance
100 Ω ±15 Ω
(1MHz up to 100 MHz)
(1MHz up to 100 MHz)
Operating peak voltage
125 V (not for power purposes)
Velocity of propagation
ca. 0.75 c
Signal propagation time
<445 ns/100m
Delay difference
20 ns/100m
Test voltage (rms 50 Hz, 1 minute)
core/core: 1000 V
core/screening: 500 V
core/screening: 500 V