Led Lenser H7.2 7397 Manuel D’Utilisation

03

LED LENSER® * H7

.2

LED brightness. Left turn the brightness of LED 

will getting lower or strobe slowly; right turn, 

the brightness of LED will getting brighter or 

strobe faster.

 

d) Boost Mode: in any state, push the front 

switch for 2 seconds to achieve boost mode. 

After 10 seconds the flashlight will return to the 

previous setting.

The Light Functions above are in a loop. 

Note that when switching modes, press the 

“Multi-function Wheel” switch on the back for no 

longer than 4 seconds, otherwise the product 

will turn off. 

When the H7.2 is off, push the front switch for 

approx. 5 seconds till the light turns off in order 

to enable the “Transport Lock.” Then the H7.2 

cannot be turned on again. The H7.2 therefore 

cannot be switched on; either intentionally or 

unintentionally and inadvertently consume 

energy.

To deactivate the “Transport Lock”, just press 

the front switch again for 5 seconds. The 

headlamp will now return to the Light Program. 

If the alkaline batteries are taken out the battery 

box you have "reset" the H7.2. You have thus 

reset a few functions so that the “Transport 

Lock” (see Section 6) is deactivated and the 

Light Function Dim (see Section 5.1) is set to low 

brightness.

Prior to the change, turn off the H7.2.

On the back of the battery back, where the 

headband is attached, there is the gate to the 

inside of the battery box. Once you open the 

battery box, there will be a silk tab that runs 

underneath the battery. In order to remove the 

battery pull the silk belt and then insert a new 

one.

During insertion, it is always necessary that it is 

in the correct direction. Therefore, pay attention 

to the polarities (+ and -) both on the battery 

box and the alkaline batteries. Otherwise, there 

is a risk for damage batteries and a possible 

explosion.

After replacing the batteries, the cover of the 

battery box has to be put back into place. 

To close the battery box, hold the battery box 

and battery cover against each other in the 

same direction, hook the battery cover above 

the multi-function switch, and then push the 

cover against the bottom, until you hear a small 

“click” sound. Then push the middle of the cover 

again, until you hear another “click”. Now the 

battery cover is securely closed. 

The headband can be washed by water. 

Please refer to the picture to disassemble and 

assemble the headband.

Never use non rechargeable batteries and 

accumulators together. 

Always change all batteries at the same time. 

In the H7.2, use only the alkaline batteries AAA/

LR03/Micro (1.5 V DC).

If you intend not to use the item for an extended 

period, please take out the batteries to avoid 

damage.

Used batteries and accumulators have to be 

taken out and disposed of in accordance to local 

laws.

To clean, use a dry, lint-free, clean cloth.

If salt water is spilled on the head lamp, it must 

be immediately entirely removed with such a 

cloth. 

The headband can be washed in a washing 

machine at 30 °C.

The H7.2 headlamp is supplied with the 

following accessories:

1 x H7.2 Headband

4 x AAA Alkaline batteries

1 x Manual

Do not swallow any small parts or batteries/

accumulators that are present. The products 

or parts thereof (including batteries / 

accumulators) must be stored out of the reach 

of children.

For safety and approval reasons (CE), the 

product must not be modified and/or changed. 

The product is to be used exclusively as an 

accumulator or battery powered lamp. If 

the H7.2 is used for any other purpose, or 

incorrectly, it can get damaged and a hazard-

free use is no longer guaranteed (danger from 

fire, short-circuit, electric shock etc.) and 

therefore there will be no liability for harm 

anyone or damage to property. The warranty of 

the manufacturer is also rendered null and void. 

The H7.2 can be operated between -20 C° and 

+50 C° (or between -4 F° and 122 F°). Ensure 

that the H7.2 is not subjected to more extreme 

temperatures, intense vibrations, explosive 

atmosphere, solvents and/or vapors. Also 

continuous exposure to direct sunlight, high 

humidity and/or moisture must be avoided.

Changes, repairs and maintenance over and 

above those described in the documents 

accompanying the product may only be carried 

out by authorized technical personnel. 

If it is found that the product is filled with 

full batteries / accumulators in the correct 

orientation (polarity!) and properly closed, and 

still unable to be function safely and normally, 

or the product shows damage, it must be 

rendered inoperable and not used any further. 

In this case, for warranty matters, contact your 

dealer.

This product is not a children's toy.

Since it has small parts that can be swallowed, 

it is especially not suitable for those under the 

age of 5.

The article may not be used for examinations of 

the eyes (e.g. for a pupil test).

When in use, heat accumulation, e.g. by 

covering, must be avoided.

If the product does not work correctly, the first 

thing that must be checked is whether this is 

due to discharged or incorrectly placed battery/

accumulators. 

If using in traffic, please follow the respective 

legal regulations.