Amphenol RT0012-8PNH Circular Connector RT0012-8PNH Fiche De Données

2

www.sineco.com

SERIES
  -  RT

  -  RTOW
SHELL TYPE
  -  0: Wall mount recep.
  -  6: Cable plug
  -  7: Jam nut recep. / rear panel mount
SHELL SIzE
  -  10, 12, 14, 16, 18, 20
INSERT ARRANGEmENT
  -  See Page 7
TYPE Of CONTACTS
  -  P: Pin contacts
  -  S: Socket contacts
INSERT POLARIzATION (See Detail below)
  -  N: Standard version
  -  W, X, Y, Z: Custom orientation
APPLICATION
  -  Blank: Standard version (no o-ring)
  -  H: Standard version, water protection IP67
PLATING
  -  Blank: Standard is nickel plating (48hr salt spray)
  -  1: Black anodized, jam nut (96hr salt spray)
  -  2: Black anodized coupling ring (96hr salt spray)
DESIGN VARIATION
  -  EC: Standard version for 18-14AWG with end cap
  -  MM: Reduced seal for 24-20AWG with end cap

SERIES
  -  RTHP
SHELL TYPE
  -  0: Wall mount recep.
  -  6: Cable plug
  -  7: Jam nut recep. / rear panel mount
SHELL SIzE
  -  12, 14, 16, 20
INSERT ARRANGEmENT
  -  See Page 7
TYPE Of CONTACTS
  -  P: Pin contacts
  -  S: Socket contacts
INSERT POLARIzATION
  -  N: Standard version
APPLICATION
  -  Blank: Standard version (no o-ring)
  -  H: Standard version, water protection IP67/69
PLATING
  -  Blank: Standard  is nickel plating (48hr salt spray)
  -  1: Black anodized, jam nut (96hr salt spray)
  -  2: Black anodized coupling ring (96hr salt spray)
DESIGN VARIATION
  -  Blank: Standard version
  -  C: Crimp contact
  -  EC: Crimp contact with end cap
  -  FG: Crimp contct with flex grip
  -  H: Flat hole
  -  M: Screw tail
  -  S: Crimp contact with cord grip

Z°

W°

X°

Y°

N

Mating Face View of Pin Inserts

The five positions (W, X, Y, Z 

and Normal) differ in degree 

of rotation for various sizes and 

arrangements.

Part Ordering Guide - RT/RTOW & RTHP Series Plugs & Receptacles

Note: Higher salt spray resistance (200/500h) upon request.