Dynamode 10/100Base TX to 100Base Fibre Optic Converter SW10010FT Fascicule

IEEE802.3/u Ethernet supports two 

types of media for network connection 

such as 10/100Base-TX and 100 Base-

FX. The bridge media converter is 

designed with a switch controller and 

buffer memory that connects two types 

of segments to operate smoothly. This 

converter can be used as a standalone 

unit or as a slide-in module to the 19" 

converter rack(up to 10 units) for use at 

a central wiring closet.

Standard

Indicators

Data transfer rate

Dimension (mm)

Power requirement

Ambient  Temperature

Humidity

Flow Control

IEEE802.3u Fast Ethernet 100Base-TX and 
100Base-FX standards

POWER, FX LNK/ACT, 100, TP LNK/ACT, FDX/COL

10Mbps (speed) - 14,880 PPS (forwarding rate)
100Mbps (speed) - 148,800 PPS (forwarding rate)

26.2(H) x 70.3(W) x 94(D) mm

1A+5V

 5%C~90%C

 5°C ~ 50°C

IEEE802.3x compliant for full-duplex
Back pressure flow control for half-duplex

MAC Address and 
Self-learning 

1K

Buffer Memory

128KByte

Support 10/100 Ethernet UTP.
Other available fiber connectors: SC/MT-RJ/VF-45 
for multi-mode and single-mode.
Standalone or composite applications.

 FCC Part 15 Class A, CE Mark & UL

Connector type

ST 1310nm

The 100Mbps 1300nm 
Fiber Transceivers

DEFAULT: ST multi-mode 2Km

UTP Cable

Cat. 5 cable up to 100m

Fiber Cable

50/125, 62.5/125, or 100/140m multi-mode
8.3/125, 8.7/125, 9/125 or 10/125m single-mode