Brother LT-26CL lower tray unit LT-26CL Manuel D’Utilisation

 

Pull out the Upper Paper 
Cassette, and then connect the 
Lower Tray Unit with the printer 
by sliding the locking clip to the 
right on the top surface of the 
Lower Tray Unit. 

 

Install the right hand side cover 
into the right side of the Lower 
Tray Unit by first fitting the hook 
at the front. 

Install the left hand side cover by 
fitting the hole at the rear side of 
the side cover to the shaft of the 
Lower Tray Unit.  Close the side 
cover by fitting the notch to the 
hook of the Lower Tray Unit. 

 

To level the tray unit, adjust the 
Anchor Feet located at the front 
and rear on the right hand side at 
the bottom of the Lower Tray 
Unit.  The Anchor Foot moves up 
and down as it is turned.  It is 
correctly adjusted when the 
Anchor Foot touches the work 
surface and the tray unit is level.  
Turn the lock screw to secure the 
Anchor Foot. 

 

Do not load Transparencies, Labels and Envelopes in the cassette 
installed into the optional Lower Tray Unit. It may cause paper jams.