Rigol DS1074B 4-channel oscilloscope, Digital Storage oscilloscope, DS1074B Manuel D’Utilisation
Codes de produits
DS1074B
RIGOL
© 2008 RIGOL Technologies, Inc.
User‟s Guide for DS1000B Series
2-33
X-Y Format
This format is useful for studying phase relationships between two signals.
Channel 1 in the horizontal axis(X) and channel 2 in the vertical axis(Y), the
oscilloscope uses a none-trigger acquisition mode, data is displayed as dots.
oscilloscope uses a none-trigger acquisition mode, data is displayed as dots.
Figure 2-38
X-Y display format
NOTE: The X-Y display format is only suitable for CH1, CH2, CH3; CH4.In the normal
condition, the oscilloscope can acquire waveforms with any sampling rate. You can
also adjust the sampling rate and the vertical scaling of the channel when you use
the X-Y display format. You can reduce the sampling rate so as to display a better
Lissajous figure.
condition, the oscilloscope can acquire waveforms with any sampling rate. You can
also adjust the sampling rate and the vertical scaling of the channel when you use
the X-Y display format. You can reduce the sampling rate so as to display a better
Lissajous figure.
The following modes or functions will not work in X-Y format.
Cursor Measurements(excluding manual mode )
REF and MATH Operations
Delayed Scan Mode
Vector Display Mode
Horizontal
knob
Trigger Controls(excluding MODE button)