Voltcraft VC850 Digital Multimeter with Software included 6000 counts CAT IV 600V, CAT III 1000V VC850 Fiche De Données
Codes de produits
VC850
GENERAL SPECIFICATIONS
SYMBOL:
6000 counts
MEASURING RATE:
Approx. 3 measuring operations/second
MEASURING LINE LENGTH:
Approx. 90 cm each
WORkING CONDITIONS:
0 to 30°C (<75 %rF), 30 to 40°C (<50 %rF)
OPERATING ALTITUDE:
max. 2,000 m
STORAGE TEMPERATURE:
-10°C to +50°C
BASIC ACCURACY:
± 5 %
VOLTAGE SUPPLY:
9 V block
battery
OVER-VOLTAGE CATEGORY:
CAT III 1,000 V, CAT IV 600 V, contamination degree 2
WEIGHT:
Approx. 380 g
DIMENSIONS (W x H x D):
185 x 91 x 43 (mm)
TECHNICAL DATA
Functions
Range
Resolution
Accuracy
±
(a% reading + b digits)
Overload
protection
DCV
600 mV
0.1 mV
±(0.5 % + 3)
1000 V
Impedance: 10 MΩ
Impedance: 10 MΩ
6 V / 60 V / 600 V
1 mV / 10 mV / 100 mV
±(0.5 % + 2)
1000 V
1 V
±(0.8 % + 3)
ACV
1
6 V / 60 V / 600 V
1 mV / 10 mV / 100 mV
±(0.8 % + 3)
Frequency range 45 – 400 Hz;
Overload protection 750 V.
Overload protection 750 V.
750 V
1 V
±(1.0 % + 5)
DCA
600 μA / 6 mA / 60 mA / 600 mA 0.1 μA / 1 μA / 10 μA/ 100 μA
±(0.8 % + 3)
Fuse, measuring time limit > 5 A:
max. 10 s with 10 min break.
max. 10 s with 10 min break.
6 A / 10 A
1 mA / 10 mA
±(1.2 % + 5)
ACA
2
600 μA / 6 mA
0.1 μA / 1 μA
±(1.0 % + 2)
Fuse, measuring time limit > 5 A:
max. 10 s with 10 min break.
Frequency range 45 – 400 Hz;
Overload protection 750 V.
max. 10 s with 10 min break.
Frequency range 45 – 400 Hz;
Overload protection 750 V.
60 mA / 600 mA
10 μA / 100 μA
±(1.2 % + 3)
6 A / 10 A
1 mA / 10 mA
±(1.5 % + 5)
Ω
600 Ω
0.1 Ω
±(0.8 % + 3)
w/ REL function
Overload protection 1,000 V;
Measuring voltage: Approx.
0.4 V.
Measuring voltage: Approx.
0.4 V.
6 kΩ / 60 kΩ / 600 kΩ
1 Ω / 10 Ω / 100 Ω
±(0.8 % + 2)
6 MΩ
1 kΩ
±(1.2 % + 2)
≥ 20 MΩ:
±(1.5 % + 5)
60 MΩ
10 kΩ
Capacity
40 nF
0.01 nF
±(3.0% + 5)
with RELfunction
Overload protection 1,000 V
400 nF
0.1 nF
4 μF
1 nF
40 μF
10 nF
±(3.0 % + 5)
400 μF
100 nF
±(4.0 % + 5)
4000 μF
1 μF
Not Specified
Frequency /
Duty Cycle
Duty Cycle
3
10 Hz to 10 MHz
0.001 Hz to 0.01 MHz
±(0.1 % + 3)
Overload protection 750 V
0.1 to 99.9 %
0.1 %
Not specified
Temperature
4
-40 to -20
º
C
1
º
C
-(8.0 % +5)
-20 to 0
º
C
±(1.2 % + 4)
0 to +100
º
C
±(1.2 % + 3)
+100 to +1000
º
C
±(2.5 % + 2)
Diode test
Approx. 3.7 V
0.001 V
NA
Overload protection 1000 V
Acoustic
continuity
tester
continuity
tester
<30 Ω continuous sound, test voltage: approx. 0.65 V/DC;.
Overload protection 1,000 V
1. TrueRMS: Crest factor: max. 3.0. Permissible display error with an open measuring input: 2 counts. Perissible display error with a short-circuited measuring input: 20 counts.
2. TrueRMS: Crest factor: max. 3.0 (at 750 V max. 1.5)
3. Sensitivity: 200 mV; Amplitude max. 5 Veff (>5 V with adjustable impedance)
4. Without sensor tolerence.
2. TrueRMS: Crest factor: max. 3.0 (at 750 V max. 1.5)
3. Sensitivity: 200 mV; Amplitude max. 5 Veff (>5 V with adjustable impedance)
4. Without sensor tolerence.
PACkAGE CONTENT
Unit // Batteries // Operating instructions
This data sheet is published by Voltcraft®, Lindenweg 15, D-92242 Hirschau / Germany, Phone +49 180 586 582 7. The data sheet reflects the current
technical specifications at time of print. We reserve the right to change the technical or physical specifications.
technical specifications at time of print. We reserve the right to change the technical or physical specifications.
© Copyright 2010 by Voltcraft®.
*02_04/10_02-HL