Pico PicoLog® 1216 0 - 2.5 Vdc USB Multi-channel voltage data logger PP547 Fiche De Données
Codes de produits
PP547
PicoLog 1000 Series Programmer's Guide
23
Copyright © 2009 Pico Technology Ltd. All rights reserved.
pl1000pg.en
3.3.17 PICO_STATUS values
Every function in the PicoLog 1000 Series API returns an error code from the following
list of
list of
PICO_STATUS
values:
Code
(hex)
(hex)
Enum
Description
00
PICO_OK
The Data Logger is functioning correctly
01
PICO_MAX_UNITS_OPENED
An attempt has been made to open more than
PL1000_MAX_UNITS
02
PICO_MEMORY_FAIL
Not enough memory could be allocated on the
host machine
host machine
03
PICO_NOT_FOUND
No PicoLog 1000 device could be found
04
PICO_FW_FAIL
Unable to download firmware
05
PICO_OPEN_OPERATION_IN_PROGRESS
A request to open a device is in progress
06
PICO_OPERATION_FAILED
The operation was unsuccessful
07
PICO_NOT_RESPONDING
The device is not responding to commands from
the PC
the PC
08
PICO_CONFIG_FAIL
The configuration information in the device has
become corrupt or is missing
become corrupt or is missing
09
PICO_KERNEL_DRIVER_TOO_OLD
The
picopp.sys
file is too old to be used with
the device driver
0A
PICO_EEPROM_CORRUPT
The EEPROM has become corrupt, so the device
will use a default setting
will use a default setting
0B
PICO_OS_NOT_SUPPORTED
The operating system on the PC is not
supported by this driver
supported by this driver
0C
PICO_INVALID_HANDLE
There is no device with the handle value passed
0D
PICO_INVALID_PARAMETER
A parameter value is not valid
0E
PICO_INVALID_TIMEBASE
The time base is not supported or is invalid
0F
PICO_INVALID_VOLTAGE_RANGE
The voltage range is not supported or is invalid
10
PICO_INVALID_CHANNEL
The channel number is not valid on this device
or no channels have been set
or no channels have been set
11
PICO_INVALID_TRIGGER_CHANNEL
The channel set for a trigger is not available on
this device
this device
12
PICO_INVALID_CONDITION_CHANNEL
The channel set for a condition is not available
on this device
on this device
13
PICO_NO_SIGNAL_GENERATOR
The device does not have a signal generator
14
PICO_STREAMING_FAILED
Streaming has failed to start or has stopped
without user request
without user request
15
PICO_BLOCK_MODE_FAILED
Block failed to start - a parameter may have
been set wrongly
been set wrongly
16
PICO_NULL_PARAMETER
A parameter that was required is
NULL
18
PICO_DATA_NOT_AVAILABLE
No data is available from a run block call
19
PICO_STRING_BUFFER_TOO_SMALL
The buffer passed for the information was too
small
small
1A
PICO_ETS_NOT_SUPPORTED
ETS is not supported on this device
1B
PICO_AUTO_TRIGGER_TIME_TOO_SHORT
The auto trigger time is less than the time it
will take to collect the data
will take to collect the data
1C
PICO_BUFFER_STALL
The collection of data has stalled as unread
data would be overwritten
data would be overwritten
1D
PICO_TOO_MANY_SAMPLES
The number of samples requested is more than
available in the current memory segment
available in the current memory segment
1E
PICO_TOO_MANY_SEGMENTS
Not possible to create number of segments
requested
requested
1F
PICO_PULSE_WIDTH_QUALIFIER
A null pointer has been passed in the trigger
function or one of the parameters is out of
range
function or one of the parameters is out of
range