Gw Instek GPT-9602 Insulation measuring device, GPT-9602 Manuel D’Utilisation
Codes de produits
GPT-9602
GPT-9600 Series User Manual
16
GPT-9603/9602/9612/9601 Rear Panel
Fan
Fuse holder
Line voltage
SIGNAL I/O
GND
TO AVOID ELECTRIC SHOCK THE POWER CORD
PROTECTIVE GROUNDING CONDUCTOR MUST BE
ONLY WITH SPECIFIED TYPE AND RATED FUSE.
NO OPERATOR SERVICEABLE COMPONENTS INSIDE.
DO NOT REMOVE COVERS. REFER SERVICING TO
NO OPERATOR SERVICEABLE COMPONENTS INSIDE.
DO NOT REMOVE COVERS. REFER SERVICING TO
FOR CONTINUED FIRE PROTECTION. REPLACE
CONNECTED TO GROUND.
QUALIFIED PERSONNEL.
WARNING
SER. NO. LB
SIGNAL I / O
CALIBRATION
USE ONLY
REMOVED FROM THE INSTRUMENT
BEFORE REPLACING THE FUSE
AC
MAX.
400VA
POWER
ENSURE THE POWER IS
LINE VOLTAGE
100 120V
( 50 / 60Hz )
250V
T 4A
FUSE
220 240V
GND
Calibration port
SIGNAL I/O port
SIGNAL I / O
The SIGNAL I/O port is used to
monitor the tester status (PASS,
FAIL, TEST) and input (START/
STOP signals). It is also used with
the Interlock key.
monitor the tester status (PASS,
FAIL, TEST) and input (START/
STOP signals). It is also used with
the Interlock key.
Calibration port
CALIBRATION
USE ONLY
The Calibration port is used for
calibration purposes only.
Calibration is not supported for
end-users. Please see your
distributor for details.
calibration purposes only.
Calibration is not supported for
end-users. Please see your
distributor for details.
Fan/Fan Vents
Exhaust fan. Allow enough room
for the fan to vent. Do not block the
fan openings.
for the fan to vent. Do not block the
fan openings.
GND
GND
Connect the GND (ground)
terminal to the earth ground.
terminal to the earth ground.