Beha Amprobe GT-800 PRO KITVDE-tester 4472081 Manuel D’Utilisation
Codes de produits
4472081
GT-600/GT-800 Instruction Manual
51
Memory Features
Any memory address consists of a client name and appliance name. Site (SIT),
location (LOC) and description (DES) can be attached to the appliance. The
memory address should be entered / selected before storing measurement
results. Operator must be entered via menu OPERATOR before carrying out the
measurements as it is attached to any measurement result immediately after
finishing the measurement.
location (LOC) and description (DES) can be attached to the appliance. The
memory address should be entered / selected before storing measurement
results. Operator must be entered via menu OPERATOR before carrying out the
measurements as it is attached to any measurement result immediately after
finishing the measurement.
Memory Structure
Measurement result, limit value and parameters are saved to selected memory
address upon receiving the SAVE command. The following structure of the
memory address is offered:
address upon receiving the SAVE command. The following structure of the
memory address is offered:
Figure 39: Storage structure
CLI : Client/customer (max. 17 characters)
APP : Appliance identification code (max. 17 characters) (STANDARD Barcode
APP : Appliance identification code (max. 17 characters) (STANDARD Barcode
mode, see page 49)
APP
: AUTO Test code (first three digits) and Appliance identification code (max.
14 characters) (COMBINED Barcode mode, see page 49)
SIT : Site (max. 17 characters)
LOC : Location/department (max. 17 characters)
DES : Description of appliance (max. 17 characters)
Nr. : Measurement number (4 digits)
LOC : Location/department (max. 17 characters)
DES : Description of appliance (max. 17 characters)
Nr. : Measurement number (4 digits)