Beha Amprobe GT-800 PRO KITVDE-tester 4472081 Manuel D’Utilisation

GT-600/GT-800 Instruction Manual 

7 

 

 

Introduction 

 

You have acquired a high-quality measurement instrument manufactured by 
BEHA-AMPROBE, which will enable you to perform repeatable measurements 
for a very long period of time. 
 
The portable appliance tester GT-600/GT-800 is a measurement instrument used 
for safety inspection on electrical appliances complying with VDE 0701-0702 and 
documentation of test results. 
 
Product description: 

 

  Protective bonding resistance measurement (R

PE

), test current 0.2 A AC and 5 

A AC. The test is carried out on plugged and also on permanently connected 
appliances. 

  Insulation resistance measurement (R

ISO

), test voltage 500 VDC (and 250 VDC 

GT-800 only). Appliances class I with heater, class I, class II and class III can be 
tested. 

  Substitute leakage current measurement (I

SUB

), test voltage 45 V AC. 

Appliances class I and class II can be tested. 

  Protective conductor current measurement (I

PE(

)

), differential method

.

 

  Touch current measurement (I

T

) direct method

.

 

  Apparent power, active power, mains voltage, load current and power factor 

PF measurement (P/I

L

). 

  Protective conductor current I

PE

 and load current I

L

 measurement (

), 

clamp method (GT-800 only). 

  IEC CORD test (PE continuity, insulation resistance, L continuity, N continuity, 

L/N shorted). 

  Test of portable RCD (PRCD), PE continuity, TEST button, output insulation 

resistance, PE current, functional test at L disconnection, functional test at N 
disconnection, trip out time at I

N/2

, trip out time at I

N

, trip out time at 5 

I

N

, tripping current (GT-800 only). 

  Protective extra low voltage (PELV) measurement. 
  Safety extra low voltage (SELV) measurement. 
  AUTO Test (13 factory-programmed AUTO-Tests, 17 customer-created AUTO-

Tests) (GT-800 only). 

  Extremely easy operation using the rotary switch and the START/STOP 

button. 

  Automatic start and save function for protective bonding resistance 

measurement allows both-hands measurements on measured objects that 
are difficult to access. 

  Compensation of test lead resistance for protective bonding resistance 

measurement. 

  Calculation of limits for protective bonding resistance. 
  Automatic mains voltage polarity exchange at protective conductor current 

and touch current measurements (GT-800 only). 

  Data memory for over 1000 measurement results. 
  Integrated interface (USB 2.0) for transfer of measurement results to PC. 
  Separate interface (USB 2.0) for connection of optional USB barcode reader, 

USB keyboard, USB memory stick or USB printer.