Beha Amprobe GT-800 STD KITVDE-tester 4472062 Manuel D’Utilisation
Codes de produits
4472062
GT-600/GT-800 Instruction Manual
35
IEC CORD Test (CORD/PRCD)
The IEC CORD test does a full test of IEC cords, extension leads and cable reels.
Following parameters are tested and measured:
Protective bonding resistance R
Following parameters are tested and measured:
Protective bonding resistance R
PE
Insulation resistance R
ISO
between PE and L/N conductors (L/N conductors are
shorted by the GT-600/GT-800 Tester)
L conductor continuity
N conductor continuity
L and N condition (OK/shorted).
N conductor continuity
L and N condition (OK/shorted).
CORD
Figure 27: CORD test connection
Display
explanation:
Figure 28: Display in CORD test
1 ...... “TYPE” soft menu key, for selection of measurement function (CORD
or PRCD).
2 ....... “COMP” soft menu key, for lead compensation of test adapter.
3 ...... “LIM” soft menu key, for pass/fail limit value setting of protective
3 ...... “LIM” soft menu key, for pass/fail limit value setting of protective
bonding.
4 ...... Test result status ( ... result OK, X ... result not OK).
5 ...... Used test current 5.0 A (fixed parameter).
6 ...... Pre-set pass/fail limit value for protective bonding R
5 ...... Used test current 5.0 A (fixed parameter).
6 ...... Pre-set pass/fail limit value for protective bonding R
PE
.
7 ...... Function selected by the rotary switch and the “TYPE” key.
8 ...... Test parameters, set limit values, test results and units.
8 ...... Test parameters, set limit values, test results and units.