Beha Amprobe Telaris ProInstall-200-DVDE-tester 4373980 Manuel D’Utilisation
Codes de produits
4373980
8
Input Terminals
Use the rotary switch to select the type of test you want to perform.
42
44
43
Number Descri ption
42
L (Line)
43
PE (Protective Earth)
44
N (Neutral)
Using the IR Port
The Model Telaris ProInstall-100 and Telaris ProInstall-200 have an IR (infrared) port, see
Figure 23, which allows you to connect the tester to a computer and upload test data using
a Amprobe PC software. This automates your troubleshooting or recording process, reduces
the possibility of manual error and allows you to collect, organize, and display test data in
a format that meets your needs. See “Uploading Test Results” on page 40 for additional
information on using the IR port.
Figure 23, which allows you to connect the tester to a computer and upload test data using
a Amprobe PC software. This automates your troubleshooting or recording process, reduces
the possibility of manual error and allows you to collect, organize, and display test data in
a format that meets your needs. See “Uploading Test Results” on page 40 for additional
information on using the IR port.
Error Codes
Various error conditions are detected by the tester and are indicated with the
W
icon,
“Err”, and an error number on the primary display. See table below. These error conditions
disable testing and, if necessary, stop a running test.
disable testing and, if necessary, stop a running test.
Figure 6. Error Display
Error Condition
Code
Solution
Self-test Fails
1
Return the tester to a Amprobe Service Center.