Soell Söll Iron test kit for photometer AQUA-CHECK 2, 10 tests 15633 Guide D’Information
Codes de produits
15633
Fe
Iron test
For fresh and salt water
Test preparation:
1 Fill both tubes up to the mark with the test water.
2 Add the content of the Fe (HR) R1 ampule to the
test, close with screw top lid and mix.
Leave standing for 1 minute.
Measuring with AQUA-CHECK:
1 Reference measurement.
2 Test measurement.
You will find important information on your measurement value at www.aqua-check.de.
Please observe the safety notes for handling chemicals (see rear).
AQUA-CHECK
AQUA-CHECK
www.aqua-check.de
R1
1 min.