Nikon L31 VNA873K001 Guide D’Exploitation

Techni

cal N

o

te

s and Index

F

If the camera fails to function as expected, check the list of common problems below before 
consulting your retailer or Nikon-authorized service representative.

Problem

Cause/Solution

A

The camera is on but does 
not respond.

Wait for recording to end.
If the problem persists, turn the camera off.
If the camera does not turn off, remove and reinsert 
the battery or batteries or, if you are using an AC 
adapter, disconnect and reconnect the AC adapter.
Note that although any data currently being recorded will 
be lost, data that have already been recorded will not be 
affected by removing or disconnecting the power source.

Camera turns off without 
warning.

• The camera automatically turns off to save power 

(auto off function).

• The camera or batteries have become too cold and 

cannot operate properly.

• The inside of the camera has become hot. Leave 

the camera off until the inside of the camera has 
cooled, and then try turning it on again.

–

Monitor is blank.

• The camera is off.

• The batteries are exhausted.

• The camera has entered standby mode to save power. 

Press the power switch, shutter-release button, A 
button, 

c button, or b (e movie-record) button.

• The flash lamp flashes while the flash is charging.

Wait for the flash to charge.

• The camera and computer are connected via a USB 

cable.

• The camera and TV are connected via an audio/

video cable.