AEG AR 4021 BT 400402 Manuel D’Utilisation

85

Place the battery into the battery compartment with 

 

‹

the positive pole at the top.

Close the battery compartment again.

 

‹

Plug the remote control onto the mounting bracket 

 

‹

cover until it clicks into place.

To protect against theft remove the front panel. Do not 

keep the front panel in the car.

 

Keep the front panel in its casing.

 

►

Do not touch the contacts on the unit or on the 

 

►

front panel.

Set the control panel with the left-hand side first into 

 

‹

the frame.

Then push the right-hand side in until it clicks into 

 

‹

place.

Flip the control panel up until it clicks into place.

 

‹

Ensure the front panel is attached properly. If the front 

 

‹

panel is not attached properly this can cause malfunc-

tions.

Press the release button (1) and flip the control panel 

 

‹

down. 

Then pull gently on the right-hand side of the control 

 

‹

panel to detach the control panel.

Replace the remote control batteries
The battery of the remote control is a long life lithium cell. 

If the range of the remote control becomes shorter whilst 

in use, follow the steps below:

Open the battery compartment (17) of the remote 

 

‹

control.

Replace the cell with a battery of the same type (CR 

 

‹

2025). Make sure that the polarity is correct.

Close the battery compartment.

 

‹
If the remote control is not in use for long periods, please 

remove the battery to prevent “leakage” of battery acid.

 

Do not expose batteries to intense heat or direct sun-

light. Never throw batteries into a fire. 

 

Batteries should not be disposed of with household was-

te. Take spent batteries to designated collection points 

or to a dealer.