Thermaltake Toughpower W0105RU Power Supply W0105RU Manuel D’Utilisation

Codes de produits
W0105RU
Page de 10
-Tough Atomic Energy 
       
Build for the Extreme-
-Tough Atomic Energy 
       
Build for the Extreme-
ATX 12V 2.2 & EPS 12V Version
ATX 12V 2.2 
 Version
& EPS 12V
05
04
3.
 Installation
3.1.1 Do not pull the AC power cord when the power supply is in 
         use or  else damage to components  will result. 
3.1.2 Do not store the  Power Supply in a high humidity and high    
         temperature environment.
3.1.3 When using an ATX type power supply under testing
         conditions where the power supply unit is not installed in a 
         PC with its components, please follow the steps below:
         1)Please take  a paper clip and  untwist it. 
         2)Make sure the power supply unit is in the "OFF" position. 
         3)Locate the 20 or 24 pin motherboard connector from the 
            power supply  unit.
         4)Plug one side of the paper clip into the green wire hole. 
         5)Plug the other side of the paper clip into any of the black 
            wire holes. 
         6)Turn on the PSU to see if the power supply fans turn on.
3.1.4 High voltages exist in the power supply. Do not open the 
         power supply case unless you are an authorized service 
         technician or  electrician.
3.1.5 All warrantees and guarantees shall be voided should there 
         be a failure to comply with any of the warnings and cautions 
         covered in  this manual.
3.1 Warnings and Cautions
2.
 Components Check
1
2
700W power supply unit
Mounting screws
3
One AC Input power cord
Toughpower 700W
Toughpower 700W
4
User manual
170 X 140 mm