TE Connectivity Connector pin AWG (min.): 18 AWG max.: 18 Brass 1 pc(s) 66570-3 Guide D’Information
Codes de produits
66570-3
114- 40030
Rev D
13
of 13
6. VISUAL AID
Figure 8 shows a typical application of an AMPLIMITE HDP--20 Subminiature D Commercial Connector with
Snap--In Contacts. This illustration should be used by production personnel to ensure a correctly applied
product. Applications which DO NOT appear correct should be inspected using the information in the preceding
pages of this specification and in the instructional material shipped with the product or tooling.
FIGURE 8. VISUAL AID
MATING CONNECTOR ASSEMBLIES
MUST MATCH IN BOTH SHELL SIZE
AND NUMBER OF POSITIONS
PULL LIGHTLY ON EACH INDIVIDUAL WIRE
TO BE SURE THAT CONTACTS ARE FULLY
SEATED AND LOCKED IN PLACE
CONNECTOR MUST BE UNDAMAGED
BY ASSEMBLY AND TIGHTENING OF
HARDWARE KIT OR ACCESSORIES
HARDWARE AND ACCESSORIES
MATCHED PROPERLY FOR
MATING AND SECURELY IN
PLACE
TYPICAL APPLICATION (SHOWS
FREE-HANGING CONNECTORS
WITH LOCKING POSTS AND
SLIDE LATCHES)