Nkk Switches Rotary switch 28 V DC/AC 0.1 A Switch postions 3 2 x 45 ° MRB14B 1 pc(s) MRB14B Fiche De Données
Codes de produits
MRB14B
Series MRB
Miniature PCB Process Sealed Rotaries
www.nkk.com
G28
Indicators
Accessories
Supplement
Tactiles
Keylocks
Pushbuttons
Illuminated PB
Slides
Programmable
Rockers
Touch
Tilt
Toggles
G
Rotaries
Electrical Capacity (Resistive Load)
Logic Level:
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: See Supplement Index to find explanation of operating range.
Other Ratings
Contact Resistance:
80 milliohms maximum
Insulation Resistance:
100 megohms minimum @ 500V DC
Dielectric Strength:
500V AC minimum for 1 minute minimum
Mechanical Life:
30,000 operations minimum
Electrical Life:
10,000 operations minimum
Operating Torque:
0.04Nm average
Contact Timing:
Nonshorting (break-before-make)
Indexing:
45° for On-On-On & 90° for On-None-On
Materials & Finishes
Shaft:
Brass with nickel plating
Bushing:
Zinc alloy with nickel plating
Frame/Bracket:
Steel with tin plating
Movable Contacts:
Beryllium copper spring with gold plating
Stationary Contacts:
Copper with gold plating
Terminals:
Brass with tin plating
Base:
Polyamide
Environmental Data
Operating Temperature Range:
–10°C through +70°C (+14°F through +158°F)
Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)
Vibration:
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
Shock:
50G (490m/s
2
) acceleration (tested in 3 right angled directions, with 5 shocks in each direction)
Sealing:
Use of optional o-ring AT535 with MRB meets IP67 of IEC60529 specifications
Installation
Mounting Torque:
.686Nm (6.08 lb
•
in)
Cap Installation Force:
19.6 ~ 29.4N (4.41 ~ 6.61 lbf)
PCB Processing
Soldering: Wave Soldering Recommended: See Profile B in Supplement section
Manual Soldering: See Profile B in Supplement section
Cleaning: Automated cleaning. See Cleaning specifications in Supplement section.
Standards & Certifications
The MRB Series rotaries have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
General
Specifications