ASUS USB 3.0 Data Charger Cable 20 Manuel D’Utilisation

2-3

ASUS PB248 Series LCD Monitor 

1. 

Connect the cables as the following instructions:

: connect one end of the power cord securely to 

the monitor’s AC input port, the other end to a power outlet. 
To connect the VGA/HDMI/DVI/DisplayPort cable

: 

Plug one end of the VGA/HDMI/DVI/DisplayPort cable to the monitor’s 

a. 

VGA/HDMI/DVI/DisplayPort jack.
Connect the other end of the VGA/HDMI/DVI/DisplayPort cable to your 

b. 

computer's VGA/HDMI/DVI/DisplayPort jack.
Tighten the two screws to secure the VGA/DVI connector.

c. 

: connect one end of the audio cable to the 

monitor’s Audio-in port, the other end to the computer’s audio-out port.
To use the earphone:

 connect the end with plug type to the monitor’s 

earphone jack when an HDMI or DisplayPort signal is fed.
To use the USB 3.0 ports

: Take the supplied USB 3.0 cable, and plug 

the smaller end (type B) of the USB upstream cable to the monitor’s USB 
upstream port, and the larger end (type A) to your computer’s USB 3.0 port. 
Make sure your computer is installed with the lastest Windows 7 operating 
system. That will enable the USB ports on the monitor to work. 

When these cables are connected, you can choose the desired signal 
from the Input Select item in the OSD menu.

Press the power button   . See page 1-2 for the location of the power button. The 
power indicator   lights up in white to show that the monitor is ON.