Gigaset HomePlug 200 AV S30853-H1706-E301 Manuel D’Utilisation
Codes de produits
S30853-H1706-E301
12
Appendix
Gigaset HomePlug AV 200 / LBA_en / A31008-N1076-E301-3-7619 / appendix.fm / 29.08.2007
Sc
hablone 2
005_0
7_2
7
Appendix
Problem Handling
The Gigaset HomePlug AV 200 can be checked using the LED display. The following
table may provide assistance should problems arise.
table may provide assistance should problems arise.
Symptom
Possible cause and solutions
The Power LED does
not light up.
not light up.
No power supply.
ì
Check if the Gigaset HomePlug AV 200 is plugged
correctly into the socket and the socket is carrying
current.
correctly into the socket and the socket is carrying
current.
Network ID reset, adapter not synchronised.
ì
Synchronise the adapter (p. 10).
The LAN LED does not
light up.
light up.
No LAN connection.
ì
Make sure the connected devices are switched on.
ì
Check whether the Ethernet cable is plugged in.
ì
Check that you are using the right cable type (CAT5) and
that the cable is not too long (longer than 100m).
that the cable is not too long (longer than 100m).
ì
Check that the network interface of the connected device
and the cable are not faulty. If necessary, replace a
defective network adapter or cable.
and the cable are not faulty. If necessary, replace a
defective network adapter or cable.
You cannot establish a
connection to other
devices in the
Powerline network.
connection to other
devices in the
Powerline network.
The Gigaset HomePlug AV 200 is not synchronised with the
other Gigaset HomePlug AV 200 in your Powerline network.
other Gigaset HomePlug AV 200 in your Powerline network.
ì
Synchronise the Gigaset HomePlug AV 200 (p. 10).
The image transfer
quality is poor.
quality is poor.
Inadequate bandwidth.
ì
Reduce the network load by switching off other
applications in the Powerline network.
applications in the Powerline network.