Newstar NS-431H Manuel D’Utilisation
15
J To adjust keyboard typematic rate (characters/sec), this setting
over-rides that of BIOS and any operating system:
left Ctrl + left Ctrl + F4
The NewStar Switch generates 1 to 4 beeps corresponding to 10,
15, 20 and 30 characters/sec respectively.
----------------- Cascade Configuration
Connection
Before connecting a device (a computer or another NEWSTAR
SWITCH product) to the master under power, you must turn off the
device. Only PS/2 port is operable for cascade operation, see
Figure 7 for details.
SWITCH product) to the master under power, you must turn off the
device. Only PS/2 port is operable for cascade operation, see
Figure 7 for details.
Figure 7: Cascade Connection
Note: The Master must have equal or more ‘PC x’ ports than that of
the slave, i.e., if an 8-port switch is the Master, an 8-port or
4-port switch can be a Slave, but not a 16-port one. PS/2-only
models can be cascaded with USB-PS/2 universal models.
4-port switch can be a Slave, but not a 16-port one. PS/2-only
models can be cascaded with USB-PS/2 universal models.
Computer Selection by Hot-Key Command
The first digit is the port address of the Master unit (1~8) and the
second digit is the port address of the Slave (1~8,A~H). Please
note that only Master's PS/2 ports can be connected to a Slave's
CONSOLE port.
second digit is the port address of the Slave (1~8,A~H). Please
note that only Master's PS/2 ports can be connected to a Slave's
CONSOLE port.
left Ctrl + left Ctrl + 1 + 3
Selects a computer connected to PS/2 or USB port 3 of a Slave
connected to PS/2 port 1 of the Master.
connected to PS/2 port 1 of the Master.
16