C&E FS20 Wireless switch 1-channel Adapter Switching capacity (max.) 3680 VA 61430 Fiche De Données
Codes de produits
61430
11
Please note:
If the time measurement is not ended manually, the timer
programming mode will automatically be ended after 270
minutes (4 hours 30min).
The timer is then programmed for a on-time of 270 minutes (4
hours 30min).
programming mode will automatically be ended after 270
minutes (4 hours 30min).
The timer is then programmed for a on-time of 270 minutes (4
hours 30min).
b) Timer operation
X
X
X
X
X
Starting the timer
There are two different ways of doing this:
• Briefly press (for fewer than 0.4 seconds) the control button on the
• Briefly press (for fewer than 0.4 seconds) the control button on the
wireless switch socket.
or:
• Briefly press (for fewer than 0.4 seconds) the right button of the assigned
• Briefly press (for fewer than 0.4 seconds) the right button of the assigned
button combination on your remote control.
X
Prematurely stopping the timer
Naturally, the wireless switch socket and connected consumer loads are
able to be switched-off manually at any time. There are two different ways
of doing this:
• Briefly press the control button on the wireless switch socket.
or:
• Briefly press (for fewer than 0.4 seconds) the left button of the assigned
able to be switched-off manually at any time. There are two different ways
of doing this:
• Briefly press the control button on the wireless switch socket.
or:
• Briefly press (for fewer than 0.4 seconds) the left button of the assigned
button combination on the remote control.
X
X
X
X
X
Deactivating timer function
• Press and hold the respective button combination on the remote control
of your wireless switch socket simultaneously for one to five seconds (1
to 5 sec).
to 5 sec).