C&E FS20 Wireless switch 1-channel Adapter Switching capacity (max.) 3680 VA 61430 Fiche De Données

• Now press and hold (for at least 0.4 seconds) your remote control button

that has been assigned to the reception channel that you wish to delete.

• Afterwards the programming mode is automatically ended and the

corresponding channel is deleted from the address list of the wireless
switch socket.

If necessary, you can delete in one step all programs and settings that were
previously saved in the wireless switch socket, thus setting the switch
socket back to its delivery state with all default settings. To do so, proceed
as follows:
• Press and hold the control button on the wireless switch socket for at

least 15 seconds.

• The control indicator/LED on the wireless switch socket starts to blink

and the device is now in programming mode. Then release the button.

• Briefly press the control button again.



All assigned addresses and the timer mode with its programmed
timer setting are now deleted or deactivated.

• The control indicator/LED goes out and the programming mode is ended.



The wireless switch socket no longer responds to any remote
command and must be programmed again!