C&E FS20 Wireless switch 1-channel Adapter Switching capacity (max.) 3680 VA 61430 Fiche De Données
Codes de produits
61430
10
8. Timer function
The wireless switch socket can also be used as a timer.
As soon as a switching time has been programmed, the
‘FS20 ST-3’ remains switched on for the programmed length
of time after each power-on command. After this time has
expired, it automatically switches off.
‘FS20 ST-3’ remains switched on for the programmed length
of time after each power-on command. After this time has
expired, it automatically switches off.
The timer is programmable for an on-time of between 1 second and 270
minutes (4 hours 30 min).
minutes (4 hours 30 min).
In order to program the timers you require a remote control
from the FS20 wireless control system. Please refer to the
corresponding user manual.
from the FS20 wireless control system. Please refer to the
corresponding user manual.
It is possible to program the timer for the load monitor
‘FS20 MS’ with its command menu; the following section
does not apply to the ‘FS20 FMS’.
does not apply to the ‘FS20 FMS’.
a) Programming the timer
• Simultaneously press and hold both buttons of the respective button
combination on your FS20 remote control for one to three seconds (1 to
3 sec).
3 sec).
• The control indicator/LED on the wireless switch socket blinks. The time
measurement for the desired on-time begins.
• After the desired amount of time has expired press both buttons on the
remote control again simultaneously for one to three seconds (1 to 3
sec).
The on-time is now programmed.
sec).
The on-time is now programmed.