C&E FS20 Wireless transmitter unit FS20 S4UB 4-channel Max. range (open field) 50 m 57125 Fiche De Données

Codes de produits

57125

d) 2-channel operation

The ‘FS20 S4UB’ flush-mounted battery transmitter can be operated as a 2-channel transmit-
ter as well as 4-channel transmitter (factory default setting).

In the case of 2-channel operation a button combination is assigned to each channel.

Channel 1:Buttons ‘TA1’ and ‘TA2’:

Channel 2:Buttons ‘TA3’ and ‘TA4’:

The button assignment for the four buttons is as follows:

Button ‘TA1’ or ‘TA3’:

Function ‘OFF’ or ‘dim down’

Button ‘TA2’ or ‘TA4’:

Function ‘ON’ or ‘dim up’

e) Switching between 2-channel and 4-channel operation

• Switching to 4-channel operation (four individual switching channels)

Press buttons ‘TA2’ and ‘TA3’ simultaneously for at least 5 seconds.

• Switching to 2-channel operation (two switching channels with two buttons each)

Press buttons ‘TA1’ and ‘TA4’ simultaneously for at least 5 seconds.



Please note:

Different operating and programming instructions apply when a double number
of channels has been set!

f) Timer function in 2-channel operation

In order to program a receiver’s timer function, proceed as follows:

• Simultaneously press the button combination that is assigned to the receiver for one to

five seconds (1 sec to 5 sec).



This command is used to start as well as to stop the programming of the timer.

For information on how to program the timer, see the instructions in the receiver’s user manual.