C&E TE857 Wireless Weather Station 646510 Fiche De Données
Codes de produits
646510
82
View Phases of the Moon of the last 29 Days or the Next 39 Days
• Briefly press the "MEM" button (3). "+0 days" appears directly beside the weather icon in the display window.
• Use the "–" (6) or "+" (7) buttons to display the moon phases for the next or last 39 days; in the upper left of the
• Use the "–" (6) or "+" (7) buttons to display the moon phases for the next or last 39 days; in the upper left of the
display, there is the corresponding moon icon (keep the button pressed for quick adjustment).
• Briefly press the "MEM" button (3) to leave the display mode (or do not press any button for approx. 5 seconds).
Full moon
New moon
Switching Thunderstorm Alarm On/Off
Usually, quickly dropping barometric pressure indicates a thunderstorm to come. In this case, a sound signal may
be given.
• Briefly press the "ALARM/CHART" button (1). At the top of the weather forecast display, a thunderstorm icon
be given.
• Briefly press the "ALARM/CHART" button (1). At the top of the weather forecast display, a thunderstorm icon
appears, and in the barometric pressure display field (lower left in the display "ON" or "OFF" is displayed.
• Pressing the "ALARM/CHART" (1) button repeatedly switches the thunderstorm alarm ON or OFF.
• Wait a few seconds after switching. Then the current barometric pressure is displayed again and the setting is
• Wait a few seconds after switching. Then the current barometric pressure is displayed again and the setting is
saved.
View Temperature or Humidity Curve for the past 24 hours
• Keep the "ALARM/CHART" (1) button pressed until the display to the right of the history display shows a small
thermometer and a small house icon with "CH1". The history display now serves to show the temperature history
measured during the past 24 hours by the temperature/humidity sensor on channel 1.
measured during the past 24 hours by the temperature/humidity sensor on channel 1.
• Keep the "ALARM/CHART" (1) button pressed again until the display to the right of the history display shows a small
humidity icon and a small house icon with "CH1". The history display now serves to show the humidity history
measured during the past 24 hours by the temperature/humidity sensor on channel 1.
measured during the past 24 hours by the temperature/humidity sensor on channel 1.
• If the "ALARM/CHART" (1) button is again pressed for a longer time, the display changes back to the barometric
pressure history ("PRESSURE" at the bottom of the display area).
View Barometric Pressure Values for the Past 24 Hours
• Repeatedly press the "HISTORY" (4) button briefly; the display shows the average barometric pressure for the past
24 hours.
Where there are no measured values, dashes ("- - - - . -") are displayed, e.g. in case of battery change or at first
commissioning.
Where there are no measured values, dashes ("- - - - . -") are displayed, e.g. in case of battery change or at first
commissioning.
The display of the barometric pressure history over the last 24 hours using the "HISTORY" button (4)
works from all display modes.
works from all display modes.