Manualsbrain.com
  1. Manuels
  2. Marques
  3. Oregon Scientific
  4. WMR200
  5. Fiche De Données

Oregon Scientific WMR200 Fiche De Données

Télécharger
Page de 11
9
EN
HOURLY RECORDS
Display
Hourly readings of up to
Barometer
24 hours back
Hourly Rainfall
24 hours back
UV
10 hours back
To view hourly records:
1.  Press desired area to activate.
2.  Press UP / DWN to view current (0) / hourly reading.
When MAX / MIN reading is displayed, the corresponding timestamp will be 
displayed in the clock area 
.
DATA LOGGER
To set DATA LOGGER:
1.  Press clock area 
 until DATA LOGGER mode is displayed.
2.  Press SET.
3.  Press UP / DWN to select frequency of data recording (1 / 2 / 5 / 10 /15).
4.  Press SET.
5.  The number of days memory will allow for records will be displayed.
Frequency in minutes
No. of days available for data logging with Memory 
available*
1
19
2
38
5
97
10
194
15
291
* based only on all provided sensors in this package being used, and after all memory 
has been cleared.
To view remaining days for records:
Press clock area 
 until DATA LOGGER mode is displayed.
 NOTE  When DATA LOGGER is full, i.e., no more records can be stored on unit, 
‘DATA LOGGER’ and ‘O Days’ will flash. 
 
SET UP SOFTWARE (FIRST TIME USE)
The  weather  station  is  capable  of  connecting  to  a  PC  computer  using  the  USB 
connection. The software can read the latest weather data collected from the base 
station.
PC system requirements
The minimum system requirements for use of the software is:
•   Operating system: Microsoft Windows XP SP2 or Vista
•   Processor: Pentium 4 or above
•   RAM: Min. 512 MB
•   Hard disk free space: Min. 512 MB
•   Screen Display Area:1024 x 768 pixels (recommended)
ADDITIONAL STEP FOR WINDOWS VISTA USERS ONLY
* For Windows XP users, please go straight to Install Software section.
  IMPORTANT  You must follow the below instructions before installing software.
Determine status of UAC (User Account Control):
1.  Click on 
ˇ
Start.
2.  In context menu, scroll to Settings and select Control Panel.
3.  Double click the User Account (and Family Safety).
4.  Double click on Change your Windows password. (If you chose the Control 
Panel classic link from left hand column in step 2, skip this step).
5.  In Turn User Account On or Off screen, identify if UAC option is enabled / on 
(ticked) or disabled / off (un-ticked).
 NOTE  We highly recommend disabling this option for seamless operation of 
the Weather OS software. 
To Turn User Account off:
6.  Deselect the UAC option by un-ticking the box (click once).
7.  Click OK.
8.  In You must restart your computer dialogue box, click Restart now.
INSTALL SOFTWARE
1.  Insert provided CD into disk drive.
2.  Run CD software.
3.  Setup  Wizard  dialogue  box  will  appear  and  guide  you  through  the  installation 
process.
Waxing Gibbous
Waning Crescent
BAR CHART
To select chart display mode:
Press bar chart area 
 to toggle between these chart displays:
•  Barometer
•  Rain
•  UV
ALARM
Weather alarms are used to alert you of certain weather conditions. Once activated, 
the alarm will turn off when a certain criterion is met.
Area
Type of alarm
Barometer
Barometer
HI
Rain
Rain rate
HI
UV
UV
HI
Temperature
Current Temperature
HI
LO
Heat Index
HI
Humidity
Current Humidity
HI
LO
Dew Point
HI
LO
Clock
Daily Alarm
Wind
Gust Wind Speed
HI
Low Wind Chill 
LO
To set the alarm:
1.  Press desired area to activate.
2.  Press AL to display Time and HI / LO alarm.
3.  Press and hold AL
4.  Press UP / DWN to set the desired values.
5.  Press 
•   AL to confirm and continue to next setting OR
•  touch anywhere  on the screen (except tool bar / weather forecast area) to 
confirm and exit.
To enable / disable alarms:
1.  Press desired area to activate.
2.  Press AL to display set Time and HI / LO alarm.
3.  Press AL ON/OFF to turn alarm ON / OFF.
“- -“ indicates alarm is not set / disabled.
  NOTE    Clock  alarm  sound  is  different  from  weather  alarms  to  allow  for  easy 
differentiation by user.
To silence any alarm: Press anywhere on the screen.
 NOTE  
 will continue flashing, despite silenced alarm, for at least 2 minutes or 
until condition ceases. 
 NOTE  When alarm is on, the channel of triggered alarm will be displayed.
MEMORY
MAX / MIN RECORDS
Area
Type of Memory
Temperature
Current Temperature
MAX
MIN
Heat Index 
MAX
MIN
Humidity
Current Humidity
MAX
MIN
Dew Point
MAX
MIN
Wind
Gust Wind Speed
MAX
Wind Chill 
MIN
To view MAX / MIN records:
1.  Press desired area to activate.
2.  Press MEM to toggle between MIN / MAX recorded values.
To clear individual area records:
1.  Press desired area to activate.
2.  Press and hold MEM.
3.  Delete process is complete when display shows current reading.