ECS K8M800-M2 K8M800-M2 (V2.0) Manuel D’Utilisation

54

VIA VT8237 SATA RAID Setup Guide

1

Install the Serial ATA hard disks into the drive bays.

2

Connect one end of the Serial ATA cable to the motherboard’s primary Serial

ATA connector (SATA1).

3

Connect the other end of Serial ATA cable to the master Serial ATA hard disk.

4

Connect one end of the second Serial ATA cable to the motherboard’s sec-

ondary Serial ATA connector (SATA2).

5

Connect the other end of Serial ATA cable to the secondary Serial ATA hard

disk.

6

Connect the Serial ATA power cable to the power connector on each drive.

7

Proceed to section “Entering VIA Tech RAID BIOS Utility” for the next proce-

dure.

1

Boot-up your computer.

2

During POST, press <TAB> to enter VIA RAID configuration utility. The follow-

ing menu options will appear.

On the upper-right side of the screen is the message and legend box. The keys on the legend
box allow you to navigate through the setup menu options. The message describes the
function of each menu item. The following lists the keys found in the legend box with their
corresponding functions.

F1

View Array

mn

Move to the next item

Enter

Confirm the selection

ESC

Exit