HP BL480c E5430 2.66GHz 2GB 459499R-B21 Manuel D’Utilisation
Codes de produits
459499R-B21
Cache Memory
Cache Memory
Cache Memory
Cache Memory
1x6 MB Level 2 cache memory (5200 Series)
2x4 MB Level 2 cache memory (5300 Series)
2x6 MB Level 2 cache memory (5400 Series)
2x4 MB Level 2 cache memory (5300 Series)
2x6 MB Level 2 cache memory (5400 Series)
Chipset
Chipset
Chipset
Chipset
Intel® 5000P chipset
Memory
Memory
Memory
Memory
Type
PC2-5300 fully buffered DIMMs operating at 667 MHz
Standard
2 GB (2 x 1 GB)
4 GB (4 x 1 GB)
4 GB (4 x 1 GB)
Maximum
64 GB (8 x 8 GB) or (6 x 8GB + 4 x 4GB )
NOTE:
NOTE:
NOTE:
NOTE: Memory must be installed in pairs.
Network Controller
Network Controller
Network Controller
Network Controller
Four (4) embedded Gigabit Ethernet network adapter ports, plus (1) additional management network
adapter port:
adapter port:
One (1) embedded NC326i Dual Port Gigabit Server Adapter
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP offload engine for
Microsoft Windows, iSCSI boot, and optional accelerated iSCSI
One (1) additional embedded 10/100 network adapter dedicated to iLO 2 management
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP offload engine for
Microsoft Windows, iSCSI boot, and optional accelerated iSCSI
One (1) additional embedded 10/100 network adapter dedicated to iLO 2 management
NOTE:
NOTE:
NOTE:
NOTE: The Gigabit Ethernet adapters transmit from the server at 2000 Mbps, full duplex per port.
However, within a Linux environment, the speed can be reduced or "throttled" using a feature available
within the Linux operating system; see the white paper at:
However, within a Linux environment, the speed can be reduced or "throttled" using a feature available
within the Linux operating system; see the white paper at:
for more information.
Once the adapter signal reaches the interconnect within the blade enclosure and communicates outside
the blade enclosure to the LAN, the blade interconnect uplink types and settings determine the cable
media, speed, duplex mode, and auto negotiation mode. Interconnects are available with Ethernet
uplinks supporting 10/100/1000T, 10/100/1000 SFP, 1000 SX fiber, and 10Gb speeds.
the blade enclosure to the LAN, the blade interconnect uplink types and settings determine the cable
media, speed, duplex mode, and auto negotiation mode. Interconnects are available with Ethernet
uplinks supporting 10/100/1000T, 10/100/1000 SFP, 1000 SX fiber, and 10Gb speeds.
Multifunction Networking
Multifunction Networking
Multifunction Networking
Multifunction Networking The embedded multifunction NC373i combines standard Gigabit Ethernet networking, TCP/IP offload
engine (TOE) for Microsoft Windows, iSCSI boot, and optional accelerated iSCSI into a single adapter.
TOE moves the processing of data in the TCP protocol stack from the server CPU to the network
card, freeing CPU cycles for other activities. With TOE, network communications are improved,
and server efficiency is increased. The NC373i offers TOE for Microsoft® Windows environments.
The iSCSI boot allows the BL480c to boot from a remote operating system (OS) image located on
a storage area network (SAN). The BL480c uses an iSCSI firmware image (iSCSI boot option
ROM) making the remote disk drive appear as a local, bootable C: drive. The BL480c is
configured to connect to and boot from the iSCSI target disk on the network and download the
OS image from the iSCSI target disk. The iSCSI boot option ROM is supplied by HP at no cost.
The additional cost and mezzanine slot usage of an add-in iSCSI HBA card is not required.
Additionally, the HP iSCSI boot solution includes scripts to significantly simplify the installation
process.
card, freeing CPU cycles for other activities. With TOE, network communications are improved,
and server efficiency is increased. The NC373i offers TOE for Microsoft® Windows environments.
The iSCSI boot allows the BL480c to boot from a remote operating system (OS) image located on
a storage area network (SAN). The BL480c uses an iSCSI firmware image (iSCSI boot option
ROM) making the remote disk drive appear as a local, bootable C: drive. The BL480c is
configured to connect to and boot from the iSCSI target disk on the network and download the
OS image from the iSCSI target disk. The iSCSI boot option ROM is supplied by HP at no cost.
The additional cost and mezzanine slot usage of an add-in iSCSI HBA card is not required.
Additionally, the HP iSCSI boot solution includes scripts to significantly simplify the installation
process.
I/O Expansion Slots
I/O Expansion Slots
I/O Expansion Slots
I/O Expansion Slots
Three I/O expansion mezzanine slots; one Type I x4 PCIe (15 watts) and two x8 PCIe (25 watts)
QuickSpecs
HP ProLiant BL480c Server Blade
HP ProLiant BL480c Server Blade
HP ProLiant BL480c Server Blade
HP ProLiant BL480c Server Blade
Standard Features
DA - 12513 Worldwide — Version 38 — July 17, 2009
Page 5