TP-LINK CPE510 Manuel D’Utilisation
Chapter 5 Network Tab
Blocked DoS Host List
Click Blocked DoS Host List to display the blocked DoS host table including
host IP and host MAC. Click Refresh to renewal the table list. Click Clear to
release all the blocked hosts. If you want to release one or some of the blocked
hosts, please select them and Click Unlock.
host IP and host MAC. Click Refresh to renewal the table list. Click Clear to
release all the blocked hosts. If you want to release one or some of the blocked
hosts, please select them and Click Unlock.
Access Control
The function of Access Control is available only in AP router mode and AP client router (WISP Client)
mode.
mode.
The function can be used to control the Internet activities of hosts in the local area network. For example,
the online time limit and the specified web stations to visit can be controlled by the filtering policy.
the online time limit and the specified web stations to visit can be controlled by the filtering policy.
Access Control
Check the Enable box to use the access control function.
Filtering Policy
There are two filtering policies to control the Internet activities:
Allow the packets specified by any enabled access control policy to pass
through the Device.
through the Device.
The hosts listed below are allowed to access the Internet under the rules. While
others are forbidden to access.
others are forbidden to access.
Deny the packets specified by any enabled access control policy to pass
through the Device.
through the Device.
The hosts listed below are forbidden to access the Internet under the rules.
While others are allowed to access.
While others are allowed to access.
- 52 -