Sapphire 11124-00-20R Manuel D’Utilisation
2
Remove any existing VGA Card from
your computer.
Or, if your computer has any on-board
graphics capability, you may need to
disable it on the motherboard. For more
information, see your computer
documentation.
(If the old VGA Card sticks, rock it
gently from end to end. Remember to save
the screw.)
(If the old VGA Card sticks, rock it
gently from end to end. Remember to save
the screw.)
Locate the slot. If necessary, remove the
metal cover from this slot; then align your
VGA Card with the AGP/PCI slot, and
press it in firmly until the card is fully
seated.
(Grasp the VGA Card by the top edge
and carefully seat it into the slot. Ensure
that the metal contacts are completely
pushed into the slot.)
(Grasp the VGA Card by the top edge
and carefully seat it into the slot. Ensure
that the metal contacts are completely
pushed into the slot.)
`
Replace the screw to fasten the card in
place, and replace the computer cover.
Plug the display cable into VGA Card; then
turn on the computer andmonitor. If your
VGA Card came with a DVI connector, you
can connect a flat panel display to the
appropriate connector, as shown ...
(Make sure all cables are securely
connected.)
connected.)
Screw
Existing
VGA Card
VGA Card
Slot
Screw
VGA Card
Display Cable
To VGA Monitor
(All VGA Cards)
To Flat Panel/LCD Display
(DVI-Ready VGA Cards Only)
Installing Your VGA Card