Dialogic Diva SIPcontrol 120 CH SW license M09-060 Fiche De Données
Codes de produits
M09-060
Dialogic
®
Diva
®
SIPcontrol
™
Software converts Dialogic
®
Diva
®
boards (Universal and V-Series) into SIP-enabled
PSTN-IP gateways. The boards support a variety of TDM protocols and interfaces, ranging from analog over ISDN and
QSIG with BRI and PRI interfaces to E1/T1 digital variants.
QSIG with BRI and PRI interfaces to E1/T1 digital variants.
The resulting SIP gateway can be used to add rich IP communication, presence, instant messaging, and multimedia
with video to traditional voice-only applications sets. The gateway creates a bridge between the SIP applications and the
switch or PBX required for connection to the PSTN, allowing voice calls to be sent to and received from TDM phones.
with video to traditional voice-only applications sets. The gateway creates a bridge between the SIP applications and the
switch or PBX required for connection to the PSTN, allowing voice calls to be sent to and received from TDM phones.
Diva SIPcontrol translates call control information from the Diva
®
board into SIP messages while voice channels are
converted into IP packets and streamed via the RTP protocol. When Diva SIPcontrol and Diva boards are combined
in a Windows
in a Windows
®
-based server, the result is a functional PSTN-IP gateway appliance with the benefits of using industry-
standard hardware and operating systems and the proven reliability of dedicated telephony boards.
Two versions of the Diva SIPcontrol software are available:
•
Version 1.5 — Can be used in conjunction with Dialogic Diva boards to provide an interface for Dialogic
®
Host
Media Processing Software. In the resulting hybrid TDM/IP environment, Dialogic HMP Software applications
written to Dialogic
written to Dialogic
®
Global Call and Dialogic
®
R4 APIs can send and receive voice, DTMF, speech, or fax calls
concurrently from TDM via ISDN BRI interfaces and from IP via H.323 and SIP interfaces.
•
Version 1.6 — Optimized for use with Microsoft
®
Office Communications Server 2007 and Microsoft
®
Exchange
Server 2007. Version 1.6 adds new features to Version 1.5 such as web-based configuration, enhanced call routing
capabilities, enhanced address manipulation, configurable cause codes, an improved dial plan, trunk selection
for outgoing calls, and enhanced regular expressions. Note: Version 1.6 does not provide an interface for
Dialogic HMP Software.
capabilities, enhanced address manipulation, configurable cause codes, an improved dial plan, trunk selection
for outgoing calls, and enhanced regular expressions. Note: Version 1.6 does not provide an interface for
Dialogic HMP Software.
Datasheet
Diva SIPcontrol
Dialogic
®
Diva
®
SIPcontrol
™
Software
Features
Benefits
Designed in accordance with Microsoft
®
SIP specifications and
supports SIP over TCP according to RFC 3261
Works with Microsoft
®
SIP-based applications, including
Microsoft
®
Exchange Server 2007 with Unified Messaging and
Microsoft
®
Office Communications Server 2007
Scales downward to support 2-, 4-, and 8-port configurations
and upward to as many as 120 channels
and upward to as many as 120 channels
Provides flexible deployment and can be used with analog or
ISDN BRI interfaces in small-to-medium enterprises or with
multiple digital E1/T1 spans in medium-to-large enterprises
ISDN BRI interfaces in small-to-medium enterprises or with
multiple digital E1/T1 spans in medium-to-large enterprises
Used with Diva boards that support major ISDN protocols,
QSIG, and vendor implementations of supplementary services
QSIG, and vendor implementations of supplementary services
Supports direct PSTN and PBX connectivity
Works with DSPs on Diva boards to support voice activity
detection, silence suppression, echo cancellation with up
to 128 ms tail length, and anti-jitter buffering
detection, silence suppression, echo cancellation with up
to 128 ms tail length, and anti-jitter buffering
Enables high-performance media processing
Supports DTMF fax collection/generation according to rfc2833
and fax detection and converts to Fax over IP (FoIP) (on fax-
enabled Diva boards only) according to the T.38 standard
(up to 33.6 kbps)
and fax detection and converts to Fax over IP (FoIP) (on fax-
enabled Diva boards only) according to the T.38 standard
(up to 33.6 kbps)
Converts DTMF fax to FoIP (and vice versa) as required
Diva boards used with Diva SIPcontrol conform to plug-and-play
standards and use Microsoft
standards and use Microsoft
®
Management Console for simple
and straightforward configuration
Easy to install and configure
Works in conjunction with Dialogic Diva Media Boards and
Dialogic HMP Software (Version 1.5)
Dialogic HMP Software (Version 1.5)
Provides a PSTN interface for Dialogic HMP Software in a
hybrid TDM-IP environment
hybrid TDM-IP environment